CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Newbie - Z-axis slipping

Posted by Terry Owens
on 2004-02-03 17:03:01 UTC
Hi,

Is the Z axis losing steps because you have the feed to high?

Regards,

Terry


> Is the drill being pushed back into the chuck
>
> jmosufsen <jmosufsen@...> wrote: --- In
CAD_CAM_EDM_DRO@yahoogroups.com, "Janice"
> wrote:
> > I'm brand new, self taught on my CNC router/engraver. I am
> > currently using a single drill point function where I am drilling
> 30-
> > 90 holes per part, at a precise depth of 0.043. I am losing depth
> > starting at about hole 25, and losing up to .030 worth of depth
> over
> > the course of the remaining holes. Am I expecting an unreasonable
> > level of precision, or are there some explanations for why a Z-axis
> > would lose depth? Thanks in advance!
>
> Chances are pretty good that your depth loss is due to thermal
> effects (e.g., thermal expansion). Even stiff, heavy-duty industrial
> CNC machines need to have their offsets readjusted after they warm up
> or after they've been running for a while.
>
> Jesse

Discussion Thread

Janice 2004-01-30 14:39:19 UTC Newbie - Z-axis slipping Dave Fisher 2004-01-30 14:51:35 UTC RE: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping Vajk Fekete 2004-01-30 15:28:24 UTC Re: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping Statman Designs, LLC 2004-01-30 16:21:21 UTC Re: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping Kib Kibel 2004-01-30 19:01:48 UTC Re: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping Jon Elson 2004-01-30 20:12:32 UTC Re: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping Bob McKnight 2004-01-30 20:24:38 UTC Re: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping industrialhobbies 2004-01-30 21:10:31 UTC Re: Newbie - Z-axis slipping jmosufsen 2004-01-30 21:30:24 UTC Re: Newbie - Z-axis slipping ballendo 2004-01-31 12:53:51 UTC Re: Newbie - Z-axis slipping brian reid 2004-02-03 15:31:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Newbie - Z-axis slipping Dave Fisher 2004-02-03 16:42:37 UTC RE: [CAD_CAM_EDM_DRO] Re: Newbie - Z-axis slipping Terry Owens 2004-02-03 17:03:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Newbie - Z-axis slipping