Re: replacing anilam crusader II control
Posted by
Jim H
on 2004-02-20 18:50:39 UTC
No this is with the com port tester connected only to the rs232 port
of the anilam control, with the control powered up.
I have previously done only a pc hook up and transmitted a program
to see what it did. Lights are on (don't remeber which) and then
blink rapidly during transmission.
Jim H.
~~~~~~~~~~~~~~~~~~~~~~~~~
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Roy J. Tellason"
<rtellason@b...> wrote:
of the anilam control, with the control powered up.
I have previously done only a pc hook up and transmitted a program
to see what it did. Lights are on (don't remeber which) and then
blink rapidly during transmission.
Jim H.
~~~~~~~~~~~~~~~~~~~~~~~~~
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Roy J. Tellason"
<rtellason@b...> wrote:
> On Wednesday 18 February 2004 07:46 pm, Jim H wrote:waiting for the
> > Roy
> >
> > Well I can't count!
>
> I've had days like that... Fighting a headache right now and
> aspirin to take effect...with the 7
>
> > There are 2 lights on the com port tester. Yes the little unit
> > led's. The DR and DSR both glow merrily red.those to try
>
> This when it's connected on both sides? I've found it handy with
> connecting only one side, and then only the other, and that letsyou know
> which signals are coming from which end.
Discussion Thread
Jim H
2004-02-16 10:52:22 UTC
replacing anilam crusader II control
Larry Ragan
2004-02-16 11:11:38 UTC
RE: [CAD_CAM_EDM_DRO] replacing anilam crusader II control
Roy J. Tellason
2004-02-16 12:34:20 UTC
Re: [CAD_CAM_EDM_DRO] replacing anilam crusader II control
Jim H
2004-02-18 18:50:46 UTC
Re: replacing anilam crusader II control
Jim H
2004-02-18 18:50:51 UTC
Re: replacing anilam crusader II control
Roy J. Tellason
2004-02-18 21:14:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: replacing anilam crusader II control
Larry Ragan
2004-02-19 08:20:02 UTC
RE: [CAD_CAM_EDM_DRO] Re: replacing anilam crusader II control
Jim H
2004-02-20 18:50:39 UTC
Re: replacing anilam crusader II control
Roy J. Tellason
2004-02-20 20:45:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: replacing anilam crusader II control
Jim H
2004-02-22 22:00:59 UTC
Re: replacing anilam crusader II control
Roy J. Tellason
2004-02-23 11:13:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: replacing anilam crusader II control
metlmunchr
2004-02-23 11:58:27 UTC
Re: replacing anilam crusader II control
Jim H
2004-02-24 07:13:50 UTC
Re: replacing anilam crusader II control
Jim H
2004-02-25 07:46:23 UTC
Re: replacing anilam crusader II control
Harvey White
2004-02-25 08:48:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: replacing anilam crusader II control
metlmunchr
2004-02-25 13:29:58 UTC
Re: replacing anilam crusader II control