Re: [CAD_CAM_EDM_DRO] problem solved....=Re: Screen says "in motion", yet motors are not turning?

sounds like you plugged it into the scsi port. cul brian f.

----- Original Message -----
From: "Mike Mueller" <mueller914@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, February 25, 2004 7:06 PM
Subject: [CAD_CAM_EDM_DRO] problem solved....=Re: Screen says "in motion",
yet motors are not turning?


> this is embarrasing, but someone "might" learn from it...I had the cable
going to the wrong DB25(?) on the back of the computer, instead of being
plugged into the "printer" port, it was plugged into who knows
what????......
>
> the first cable I tried was female/female....the correct cable is
male/female.....I figured it out when I saw an extra cable just sitting on
the table, I knew I had used it before for some reason :)
>
> Mike
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Mike Mueller" <mueller914@y...>
wrote:
> >
> > About a year ago I had my mill operating using TurboCNC (for a week)
> > (Camtronics power supply<servo>, Gecko drivers)
> > I took the machine apart and I am now getting to putting it together
again.
> >
> > Tonight I plugged everything in again and tried to Jog the motors.
> >
> > On the screen that shows the readout or position of the servo for a
particular axis, I can enter a postion, hit "G"(go)/"Y"(yes) and I get a
"compensating" then a "in motion" instead of the numbers, yet the motor does
not turn.
> >
> > I have voltage to the motor(s), and the correct signals to the
encoders(????)
> >
> > Thanks
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>