Re: How close can the wires be ? - Advice needed.

Jeff,

If you shield is grounded at the drive end only and if you are using
our G320 REV7 drives, feel free to bundle them in a common harness.

Mariss

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "ja_erickson"
<ja_erickson@y...> wrote:

> Greetings,
>
> How far away from a 230 vac spindle motor do you have to keep a
> shielded encoder wire? or dont you have to worry about it.
> Can you zip tie a servo motor output wire and its encoder wire
> together or is this a bad practice.I'm concerned about noise
> and crosstalk and such. Generally speaking how far should I keep
> AC wiring from DC step and dir. wires, encoder wires etc.
>
> Thanks
> Jeff