RE: [CAD_CAM_EDM_DRO] re:Re: re:RE: LARGE Gantry table
Posted by
Leslie M. Watts
on 2004-03-11 11:34:34 UTC
Bill,
GRAPE is a very easy to use finite element program.
Details can be found at:
http://overton.tamu.edu/aset/krajci/truss-analysis/truss-analysis.htm
Les
Leslie M.Watts
L M Watts Furniture
Tiger Georgia USA
(706) 212-0242
http://www.lmwatts.com
Engineering page:
http://www.lmwatts.com/shop.html
CNC surplus for sale:
http://www.lmwatts.com/forsale.html
CNC carved signs:
http://www.lmwatts.com/signwp.html
-----Original Message-----
From: billbryden [mailto:billbryden@...]
Sent: Thursday, March 11, 2004 12:14 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] re:Re: re:RE: LARGE Gantry table
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Elliot Burke" <elliot@h...>
wrote:
software programs for the non-specialist? Comments about the pro and
cons of each and what CAD programs they work with would be great.
Thanks in advance.
Bill
GRAPE is a very easy to use finite element program.
Details can be found at:
http://overton.tamu.edu/aset/krajci/truss-analysis/truss-analysis.htm
Les
Leslie M.Watts
L M Watts Furniture
Tiger Georgia USA
(706) 212-0242
http://www.lmwatts.com
Engineering page:
http://www.lmwatts.com/shop.html
CNC surplus for sale:
http://www.lmwatts.com/forsale.html
CNC carved signs:
http://www.lmwatts.com/signwp.html
-----Original Message-----
From: billbryden [mailto:billbryden@...]
Sent: Thursday, March 11, 2004 12:14 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] re:Re: re:RE: LARGE Gantry table
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Elliot Burke" <elliot@h...>
wrote:
> although there is some software usable by non-specialists.Any suggestions or recommendations people have for lower cost FEA
software programs for the non-specialist? Comments about the pro and
cons of each and what CAD programs they work with would be great.
Thanks in advance.
Bill
Discussion Thread
cutthroatplasmaco
2004-03-09 13:52:57 UTC
LARGE Gantry table
Robert Campbell
2004-03-09 15:09:44 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table
Leslie M. Watts
2004-03-09 15:19:43 UTC
RE: [CAD_CAM_EDM_DRO] LARGE Gantry table
Leslie M. Watts
2004-03-09 16:04:46 UTC
RE: [CAD_CAM_EDM_DRO] LARGE Gantry table
Jon Elson
2004-03-09 20:17:11 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table
Doug Fortune
2004-03-09 21:54:31 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table
Elliot Burke
2004-03-10 08:34:50 UTC
re:RE: LARGE Gantry table
Kim Lux
2004-03-10 09:22:37 UTC
RE: [CAD_CAM_EDM_DRO] LARGE Gantry table: Geckos on large servos.
brunoian1127
2004-03-10 09:32:50 UTC
Re: LARGE Gantry table: Geckos on large servos.
Kim Lux
2004-03-10 10:08:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: LARGE Gantry table: Geckos on large servos.
Lindsay
2004-03-10 10:08:31 UTC
Re: [CAD_CAM_EDM_DRO] re:RE: LARGE Gantry table
Jon Elson
2004-03-10 10:52:46 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table: Geckos on large servos.
Jon Elson
2004-03-10 10:54:45 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table: Geckos on large servos.
Kim Lux
2004-03-10 12:14:04 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table: Geckos on large servos.
Kim Lux
2004-03-10 12:14:39 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table: Geckos on large servos.
Elliot Burke
2004-03-10 16:16:23 UTC
re:Re: re:RE: LARGE Gantry table
billbryden
2004-03-10 21:16:54 UTC
re:Re: re:RE: LARGE Gantry table
Jon Elson
2004-03-10 21:29:53 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table: Geckos on large servos.
Jon Elson
2004-03-10 21:44:45 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table: Geckos on large servos.
ballendo
2004-03-10 23:02:49 UTC
Re: LARGE Gantry table
ballendo
2004-03-11 09:10:30 UTC
Re: re:RE: LARGE Gantry table
Leslie M. Watts
2004-03-11 11:34:34 UTC
RE: [CAD_CAM_EDM_DRO] re:Re: re:RE: LARGE Gantry table
Peter Reilley
2004-03-11 12:33:01 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table: Geckos on large servos.
Mariss Freimanis
2004-03-11 12:51:43 UTC
Re: LARGE Gantry table: Geckos on large servos.
Kim Lux
2004-03-11 13:41:24 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table: Geckos on large servos.
Jon Elson
2004-03-11 19:32:43 UTC
Re: [CAD_CAM_EDM_DRO] LARGE Gantry table: Geckos on large servos.
Peter Reilley
2004-03-11 22:02:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: LARGE Gantry table: Geckos on large servos.