Re: [CAD_CAM_EDM_DRO] Re: Controllers

The forth axes can be used for rotary table, the forth relay OUT is tied to
the charge pump.
Jim

----- Original Message -----
From: "Mike Kunz" <mpkunz@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, March 19, 2004 11:39 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Controllers


> >
> >Yes, with Mach2 will support four axis on one parallel port. The four
> >outputs are selected by using M codes. Trying to multiplex them may be a
> >little tricky.
> >
> >Remember, the forth output port is currently used with the charge pump
> >function if the charge pump function is selected. A solid-state relay can
be
> >connected to the same port and will be active anytime the charge pump is
> >active.
>
> Does this mean the fourth channel on these breakout boards cannot be used
> to control a rotatry table (provides only ON-OFF control) ?
>
> Mike
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>