Re: VFD question
Posted by
metlmunchr
on 2004-04-19 11:55:03 UTC
Obviously if you're feeding in single phase power, the reversing
starter would have to be on the leaving side of the VFD. Where
should it be if you're feeding the VFD with 3 phase power?
Cliff
starter would have to be on the leaving side of the VFD. Where
should it be if you're feeding the VFD with 3 phase power?
Cliff
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
>
>
> stevenson_engineers wrote:
>
> >--- In CAD_CAM_EDM_DRO@yahoogroups.com, Bill Vance <ccq@x> wrote:
> >
> >
> >>Hi folks;
> >>
> >>Are VFDs and the 3ph motors they control, reversable; All,
some,
> >>
> >>
> >none?
> >
> >
> All VFDs and 3 phase motors are reversible. You just reverse the
phase
> order to reverse rotation.
>
> Jon
Discussion Thread
Greg Nuspel
2004-02-29 11:01:18 UTC
VFD question
Jon Elson
2004-02-29 11:41:38 UTC
Re: [CAD_CAM_EDM_DRO] VFD question
Dave Fisher
2004-02-29 17:27:54 UTC
RE: [CAD_CAM_EDM_DRO] VFD question
Bill Vance
2004-04-19 05:31:32 UTC
VFD question
stevenson_engineers
2004-04-19 07:44:37 UTC
Re: VFD question
Jon Elson
2004-04-19 09:40:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
metlmunchr
2004-04-19 11:55:03 UTC
Re: VFD question
washcomp
2004-04-19 12:01:31 UTC
Re: VFD question
Brian Botton
2004-04-19 19:31:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
Jon Elson
2004-04-20 00:14:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
Marv Frankel
2004-04-20 01:20:29 UTC
Re: VFD question
stevenson_engineers
2004-04-20 05:56:21 UTC
Re: VFD question
jmkasunich
2004-04-20 08:17:08 UTC
Re: VFD question
Brian Botton
2004-04-20 10:20:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
Brian Botton
2004-04-20 10:47:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
jmkasunich
2004-04-20 14:32:20 UTC
Re: VFD question
Marv Frankel
2004-04-20 23:28:09 UTC
Re: VFD question
mayfieldtm
2004-04-21 07:44:46 UTC
Re: VFD question
Stan Aarhus
2004-04-21 07:56:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
Marv Frankel
2004-04-21 08:17:40 UTC
Re: VFD question
Jon Elson
2004-04-21 09:13:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
stevenson_engineers
2004-04-21 09:52:49 UTC
Re: VFD question
stevenson_engineers
2004-04-21 09:55:41 UTC
Re: VFD question