Re: [CAD_CAM_EDM_DRO] Re: VFD question
Posted by
Jon Elson
on 2004-04-21 09:13:32 UTC
Marv Frankel wrote:
version) and use it the same way. But, it could be dangerous for someone
who didn't know better to flip the switch when the motor was running.
some REAL mass in the chuck.
Jon
>John,I have the original reversing switch, too (although not the dual-speed
> I should have explained further that I do not start, stop, or
>reverse the mill, with the original switch.
>
version) and use it the same way. But, it could be dangerous for someone
who didn't know better to flip the switch when the motor was running.
> The VFD is always shutYes, I like this feature, too. Especially on my 15" lathe, where there is
>down first, which doesn't present a big problem, Because of the built-
>in braking of the VFD, the machine stops pretty quickly.
>
>
some REAL mass in the chuck.
Jon
Discussion Thread
Greg Nuspel
2004-02-29 11:01:18 UTC
VFD question
Jon Elson
2004-02-29 11:41:38 UTC
Re: [CAD_CAM_EDM_DRO] VFD question
Dave Fisher
2004-02-29 17:27:54 UTC
RE: [CAD_CAM_EDM_DRO] VFD question
Bill Vance
2004-04-19 05:31:32 UTC
VFD question
stevenson_engineers
2004-04-19 07:44:37 UTC
Re: VFD question
Jon Elson
2004-04-19 09:40:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
metlmunchr
2004-04-19 11:55:03 UTC
Re: VFD question
washcomp
2004-04-19 12:01:31 UTC
Re: VFD question
Brian Botton
2004-04-19 19:31:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
Jon Elson
2004-04-20 00:14:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
Marv Frankel
2004-04-20 01:20:29 UTC
Re: VFD question
stevenson_engineers
2004-04-20 05:56:21 UTC
Re: VFD question
jmkasunich
2004-04-20 08:17:08 UTC
Re: VFD question
Brian Botton
2004-04-20 10:20:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
Brian Botton
2004-04-20 10:47:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
jmkasunich
2004-04-20 14:32:20 UTC
Re: VFD question
Marv Frankel
2004-04-20 23:28:09 UTC
Re: VFD question
mayfieldtm
2004-04-21 07:44:46 UTC
Re: VFD question
Stan Aarhus
2004-04-21 07:56:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
Marv Frankel
2004-04-21 08:17:40 UTC
Re: VFD question
Jon Elson
2004-04-21 09:13:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD question
stevenson_engineers
2004-04-21 09:52:49 UTC
Re: VFD question
stevenson_engineers
2004-04-21 09:55:41 UTC
Re: VFD question