CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting

on 2004-04-28 12:55:47 UTC
Yep... 1076 oz-in. = 5.604156 Ft-lb

-----Original Message-----
From: washcomp [mailto:jeff@...]
Sent: Wednesday, April 28, 2004 1:36 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting


Can't find my conversion table, but Im thinking that if there are 16
oz to the lbs and 12 in to the foot then:

1076 / (16*12) = 5.6 ft-lbs?

Jeff


--- In CAD_CAM_EDM_DRO@yahoogroups.com, <jess@p...> wrote:
> What is 1076 oz-in in ft-lbs or Nm ? What is the conversion?
>
> Regards
> Jess
>
> ----- Original Message -----
> From: <shyningnight@y...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Wednesday, April 28, 2004 12:26 AM
> Subject: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting
>
>
> > Hi!
> > I'm in about the same place you are...
> > I'm getting the impression that the more electronics you know,
the cheaper
> you can do it.
> > If you're an electrical idiot like me, you end up paying more for
other
> people to assemble
> > things for you :-)
> > It's looking to me like my Mill/Drill conversion is going to cost
me under
> $1000. How
> > much under? I don't know yet. (depends on how much help I can
get from a
> friend of mine
> > who is an electrical engineer ;-).
> > If you want to start out real good with one component that's
usually
> expensive; go to Dan
> > Mauch's site (Camtronics) at http://www.seanet.com/~dmauch/ and
buy three
> of the
> > heavy duty stepper motors he's got!
> > They're a fantastic deal!
> > AND he carries all the other parts for the conroller end of
things too.
> > Hope this helps!... one newbie to another.
> >
> > Paul F.
> >
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "skunkphallus"
<skunkphallus@y...>
> > wrote:
> > > Hello,
> > >
> > > I recently purchase an older mill/drill and am thinking of
making a
> > > CNC machine out of it. This will be the first time that I tried
> > > anything like this, but I am pretty sure I can do it. I am just
> > > wondering if anyone can give me a ballpark of what it will cost
for
> > > all the components? Or if anyone has finished this project,
what
> > > components did you use and about how much did you spend?
> > >
> > > Thanks in advance
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a...,
> timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a
> sister site to the CCED group, as many of the same members are
there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --
> > Incoming mail is certified Virus Free.
> > Checked by AVG Anti-Virus (http://www.grisoft.com).
> > Version: 7.0.230 / Virus Database: 262.9.7 - Release Date:
26/4/2004
> >
> >
>
>
>
> --
> Outgoing mail is certified Virus Free.
> Checked by AVG Anti-Virus (http://www.grisoft.com).
> Version: 7.0.230 / Virus Database: 262.9.8 - Release Date: 27/4/2004



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

skunkphallus 2004-04-27 05:52:45 UTC Thinking of retrofitting shyningnight@y... 2004-04-27 07:26:54 UTC Re: Thinking of retrofitting Andy Wander 2004-04-27 07:42:20 UTC RE: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting Roy J. Tellason 2004-04-27 08:04:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting jess@p... 2004-04-28 10:59:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting Tony Jeffree 2004-04-28 11:31:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting washcomp 2004-04-28 11:36:56 UTC Re: Thinking of retrofitting Dan Mauch 2004-04-28 12:22:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting Armistead, Matthew D - Norman, OK - Cont 2004-04-28 12:55:47 UTC RE: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting Armistead, Matthew D - Norman, OK - Cont 2004-04-28 12:58:05 UTC RE: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting David Dearing 2004-04-28 13:09:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting Michael Johnston 2004-04-28 13:09:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting jess@p... 2004-04-28 21:06:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting jess@p... 2004-04-28 21:12:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting jess@p... 2004-04-28 21:48:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Thinking of retrofitting