CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] AJAX does Linux

Posted by Doug Chartier
on 2004-06-25 14:10:01 UTC
At 02:49 PM 6/25/2004, you wrote:
>If Linux supports network connections and/or USB from the command line,
>it would be very useful for transferring large files and for backup.
>
>I've been trying to get DOS to recognize a USB flash drive for backup.
>Close but not there yet, just don't have time to mess with it right now.


Agree about the USB prospects. The Centroid/Ajax M-400 controller used a
flash card for the hard drive now, so setting up another might not be that
difficult.

Just got off the phone with the Centroid factory rep. He tells me Centroid
is considering changing over completely to Linux. That will open up the
door to all sorts of add on hardware - CD, larger hard drive, possibly
putting the complete operations manual either on CD or the hard drive, more
graphics etc. Personally, I am happy with the graphics available on the
DOS system.

Might be worth a look. The M-400 uses the flash card for hard drive C:,
but there is space for a real hard drive too. Wiring, plug ins and metal
frame are already there, so using another hard drive with the flash card
should be an easy and relatively inexpensive addition if the need arrises.

Doug C.

Discussion Thread

photoshop4eva 2004-06-24 12:58:03 UTC Stuck between a rock and a hard place: Z axis conversion with manual control Jon Elson 2004-06-24 19:29:11 UTC Re: [CAD_CAM_EDM_DRO] Stuck between a rock and a hard place: Z axis conversion with manual control C.S. Mo 2004-06-25 08:11:09 UTC Re: [CAD_CAM_EDM_DRO] Stuck between a rock and a hard place: Z axis conversion with manual control Bill P @ ... 2004-06-25 08:59:58 UTC AJAX does Linux Doug Chartier 2004-06-25 11:15:04 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Bill P @ ... 2004-06-25 12:03:47 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Jon Anderson 2004-06-25 12:55:04 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Doug Chartier 2004-06-25 14:10:01 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Jon Elson 2004-06-25 20:38:56 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Doug Chartier 2004-06-25 23:18:04 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Vajk Fekete 2004-06-26 04:41:37 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Raymond Heckert 2004-06-27 16:44:41 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Doug Chartier 2004-06-27 17:06:30 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Jon Elson 2004-06-28 20:57:40 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Doug Chartier 2004-06-29 06:57:49 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Jon Elson 2004-06-29 10:00:32 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux Doug Chartier 2004-06-29 11:26:07 UTC Re: [CAD_CAM_EDM_DRO] AJAX does Linux