Re: [CAD_CAM_EDM_DRO] Re: laser cnc
Posted by
terence figa
on 2004-09-01 23:30:15 UTC
hi
thanks for an interesting and practical reply , youve given me plenty to chew on.
I was interested in building a wooden clock and at a model engineering stand , hosted by a well known clock maker(john wilding) there were precut wheels for one of his clock projects that were laser cut .i did not realise the almost perfect results you could achieve, which started me thinking.
cheers
terry
Graham Stabler <eexgs@...> wrote:
I am not an expert by I have been reading up on home CNC laser. If
you don't just find a laser and most people won't then the simplest
type to build is a CO2 laser. There are two basic types to worry
about, sealed and flowing gas. The latter is the easier to make
from scratch, the former would normally be bought or at least the
tube would.
Rather than preach on a subject I know little about I will let you
read from Sam's FAQs. The main site seems a bit funny at the moment
but this mirror works:
http://straylight.cso.niu.edu/repairfaq/sam/lasercc2.htm
Read till you bleed and you will have a pretty good idea of what can
be done.
I myself have bought plans for a 35W CO2 flowing gas laser from:
http://www.emissiontechnologies.com
I can recommend the plans and the price can even be put against a
kit if you decide to go down that route. He also does a CNC
system. The laser contruction does not require glass blowing and
only really needs a little bit of lathe work and a bit of telephone
time locating pyrex tubing. The power supply is neon sign
transformer based and definately the most dangerous part of the
operation.
As far as what you can cut then I think you should rule out metal on
a first machine, there is too much to learn. The 35W unit should
cut plastic wood etc with no problems and pretty quick. Sam's FAQ
page has a bit on what can be cut etc.
As for the machine, belt driven gantry seems sensible as per the
emmisiontech machine, steppers should be pretty fast. I think you
need to have constant velocity type control as per Mach2 (I am not
sure on this). Servos would be an added bonus.
That's all I can think of right now
Cheers,
Graham
p.s. One thing to mention, you need special optics as normal glass
does not pass IR at 10.6um. These guys seem good and quite cheap:
http://laserresearch.net/
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
[Non-text portions of this message have been removed]
thanks for an interesting and practical reply , youve given me plenty to chew on.
I was interested in building a wooden clock and at a model engineering stand , hosted by a well known clock maker(john wilding) there were precut wheels for one of his clock projects that were laser cut .i did not realise the almost perfect results you could achieve, which started me thinking.
cheers
terry
Graham Stabler <eexgs@...> wrote:
I am not an expert by I have been reading up on home CNC laser. If
you don't just find a laser and most people won't then the simplest
type to build is a CO2 laser. There are two basic types to worry
about, sealed and flowing gas. The latter is the easier to make
from scratch, the former would normally be bought or at least the
tube would.
Rather than preach on a subject I know little about I will let you
read from Sam's FAQs. The main site seems a bit funny at the moment
but this mirror works:
http://straylight.cso.niu.edu/repairfaq/sam/lasercc2.htm
Read till you bleed and you will have a pretty good idea of what can
be done.
I myself have bought plans for a 35W CO2 flowing gas laser from:
http://www.emissiontechnologies.com
I can recommend the plans and the price can even be put against a
kit if you decide to go down that route. He also does a CNC
system. The laser contruction does not require glass blowing and
only really needs a little bit of lathe work and a bit of telephone
time locating pyrex tubing. The power supply is neon sign
transformer based and definately the most dangerous part of the
operation.
As far as what you can cut then I think you should rule out metal on
a first machine, there is too much to learn. The 35W unit should
cut plastic wood etc with no problems and pretty quick. Sam's FAQ
page has a bit on what can be cut etc.
As for the machine, belt driven gantry seems sensible as per the
emmisiontech machine, steppers should be pretty fast. I think you
need to have constant velocity type control as per Mach2 (I am not
sure on this). Servos would be an added bonus.
That's all I can think of right now
Cheers,
Graham
p.s. One thing to mention, you need special optics as normal glass
does not pass IR at 10.6um. These guys seem good and quite cheap:
http://laserresearch.net/
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
[Non-text portions of this message have been removed]
Discussion Thread
tfiga221
2004-09-01 07:59:31 UTC
laser cnc
skykotech
2004-09-01 08:25:56 UTC
Re: laser cnc
Jones, Joseph A1
2004-09-01 08:53:34 UTC
RE: [CAD_CAM_EDM_DRO] Re: laser cnc
skykotech
2004-09-01 09:08:17 UTC
Re: laser cnc
Jones, Joseph A1
2004-09-01 09:19:41 UTC
RE: [CAD_CAM_EDM_DRO] Re: laser cnc
Stephen Wille Padnos
2004-09-01 09:21:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cnc
Bob McKnight
2004-09-01 11:34:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cnc
Roy J. Tellason
2004-09-01 15:47:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cnc
Graham Stabler
2004-09-01 17:34:26 UTC
Re: laser cnc
Graham Stabler
2004-09-01 17:38:26 UTC
Re: laser cnc
skykotech
2004-09-01 18:17:24 UTC
Re: laser cnc
wanliker@a...
2004-09-01 19:01:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cnc
Bob McKnight
2004-09-01 20:59:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cnc
Jon Elson
2004-09-01 21:58:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cnc
skykotech
2004-09-01 22:50:49 UTC
Re: laser cnc
skykotech
2004-09-01 22:57:17 UTC
Re: laser cnc
terence figa
2004-09-01 23:30:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cnc
terence figa
2004-09-02 08:02:06 UTC
RE: [CAD_CAM_EDM_DRO] Re: laser cnc
skykotech
2004-09-02 08:52:03 UTC
Re: laser cnc
Tom Hubin
2004-09-02 13:26:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cnc
Bob McKnight
2004-09-02 21:54:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cnc
Graham Stabler
2004-09-03 02:10:20 UTC
Re: laser cnc
josef wagner
2004-09-03 03:19:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cnc
Bob Muse
2004-09-03 10:01:13 UTC
Re: laser cnc
Bob McKnight
2004-09-03 18:17:23 UTC
RE: [CAD_CAM_EDM_DRO] Re: laser cnc
Bob Muse
2004-09-04 11:29:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cnc