Re: [CAD_CAM_EDM_DRO] Re: laser cnc

just an other hint
i do know a here on the european continent very well know firm in
saarbruecken, germany, who are doing a really well job by laser
cutting all types of woods as well as cartoon
contact www.casalux.de
best greetings from vienna
josef wagner
+++

----- Original Message -----
From: "Graham Stabler" <eexgs@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, September 03, 2004 11:09 AM
Subject: [CAD_CAM_EDM_DRO] Re: laser cnc


>
>> The emmission technologies website was a good suggestion.
> Certainly
>> the cheapest (non-ebay) place where you can buy kits or sealed
>> tubes. Don't forget the vacuum pump, gas cylinder, regulator, and
>> flow valves when you start thinking about building a flowing gas
>> laser to save money.
>
>
> Good point. This is where ebay can come to the rescue again however
> a fridge compressor seems to be adequate if you really need to save
> the cash.
>
> I would quite like a sealed laser but apart from emmision tech the
> other suppliers don't seem all that forth comming over details, much
> like the other suppliers of kits. They never seem to show a decent
> picture of what you are buying, never mind it actually operating.
>
> If anyone has a good source for sealed CO2 laser tubes that are
> known to be of good quality and work then I am interested to find
> new sources.
>
> Considering the lack of mass you have to move when making a CNC
> laser cutter the CNC part should be a joy to do. Can't wait to get
> building.
>
> Graham
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>