Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ??
Posted by
Brian
on 2004-10-03 06:21:12 UTC
Hi, cant help with the math, but when i found some square tubing, had nice
round corners, and 3/16 wall thick. made a cnc frame, was stiff. went to
find more tubing, found that tubing was custom ordered,,,very expensive to
buy a large lot. so check the tubing and make sure it is a common stocked
tubing. check with a fabricator..cul brian f.
round corners, and 3/16 wall thick. made a cnc frame, was stiff. went to
find more tubing, found that tubing was custom ordered,,,very expensive to
buy a large lot. so check the tubing and make sure it is a common stocked
tubing. check with a fabricator..cul brian f.
----- Original Message -----
From: "turbulatordude" <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, October 02, 2004 6:15 PM
Subject: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ??
>
>
> Hi all,
>
> I'm looking at 2 or 3" box tubing as a frame for a router.
>
> It seems the stuff comes in different wall thickess and that would
> offer different strenghts for vibration as well as flexing.
>
> One of my concerns is a 5 foot lenght and how much it will bend under
> cutting pressures.
>
> Does anyone know how to calculate this ? or is there software that is
> available ?
>
> Dave
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Discussion Thread
turbulatordude
2004-10-02 15:15:10 UTC
steel tubing strenght formulas ??
Tom Hubin
2004-10-02 15:56:35 UTC
Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ??
Tyson S.
2004-10-02 17:23:05 UTC
Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ??
Brian
2004-10-03 06:21:12 UTC
Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ??
Hal Eckhart
2004-10-03 07:45:32 UTC
Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ??
turbulatordude
2004-10-03 13:29:12 UTC
Re: steel tubing strenght formulas ??
Raymond Heckert
2004-10-03 17:32:37 UTC
Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ??
Tom Hubin
2004-10-03 22:34:44 UTC
Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ??
Michael Moore
2004-10-04 06:53:01 UTC
Re: steel tubing strenght formulas ??
Hal Eckhart
2004-10-05 21:56:58 UTC
Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ??
turbulatordude
2004-10-06 01:30:54 UTC
Re: steel tubing strenght formulas ??
metlmunchr
2004-10-06 08:46:50 UTC
Re: steel tubing strenght formulas ??
turbulatordude
2004-10-06 09:43:36 UTC
Re: steel tubing strenght formulas ?? plasma table