CAD CAM EDM DRO - Yahoo Group Archive

Re: steel tubing strenght formulas ??

on 2004-10-06 01:30:54 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Hal Eckhart <hal@c...> wrote:
> On 10/2/04 10:15 PM, turbulatordude wrote:
>
> >is there software that is available ?
>
> Maybe. Here's a simplistic attempt anyhow. Seems like it works from
my
> limited testing, but no guarantees.
>
> <http://www.metalgeek.com/static/deflection.php>


yikes ! A 3 inch squate tube with 1/8 wall and only a 50 pound
load will deflect about 4 thou.

A 100 pound load will deflect about 8 thou.

Neither is too bad for a plasma cutter, but both are horrible for a
router.

Dave



>
> Hal Eckhart - Casa Forge - Minneapolis MN -
<http://www.casaforge.com>

Discussion Thread

turbulatordude 2004-10-02 15:15:10 UTC steel tubing strenght formulas ?? Tom Hubin 2004-10-02 15:56:35 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? Tyson S. 2004-10-02 17:23:05 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? Brian 2004-10-03 06:21:12 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? Hal Eckhart 2004-10-03 07:45:32 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? turbulatordude 2004-10-03 13:29:12 UTC Re: steel tubing strenght formulas ?? Raymond Heckert 2004-10-03 17:32:37 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? Tom Hubin 2004-10-03 22:34:44 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? Michael Moore 2004-10-04 06:53:01 UTC Re: steel tubing strenght formulas ?? Hal Eckhart 2004-10-05 21:56:58 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? turbulatordude 2004-10-06 01:30:54 UTC Re: steel tubing strenght formulas ?? metlmunchr 2004-10-06 08:46:50 UTC Re: steel tubing strenght formulas ?? turbulatordude 2004-10-06 09:43:36 UTC Re: steel tubing strenght formulas ?? plasma table