CAD CAM EDM DRO - Yahoo Group Archive

Re: steel tubing strenght formulas ??

on 2004-10-03 13:29:12 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Brian" <ka1bbg@w...> wrote:
> Hi, cant help with the math, but when i found some square tubing,
had nice
> round corners, and 3/16 wall thick. made a cnc frame, was stiff.
went to
> find more tubing, found that tubing was custom ordered,,,very
expensive to
> buy a large lot. so check the tubing and make sure it is a common
stocked
> tubing. check with a fabricator..cul brian f.

I can usually get 2-3 and 4 inch square stock like you mentioned,
with rounded corners.

Also in 1/8, 3/16 and 1/4 wall. These are in 10 foot or 20 foot
lengths.

I hate to get stuff that will be too thin and don't really want stuff
that is too heavy.

Dave

Discussion Thread

turbulatordude 2004-10-02 15:15:10 UTC steel tubing strenght formulas ?? Tom Hubin 2004-10-02 15:56:35 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? Tyson S. 2004-10-02 17:23:05 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? Brian 2004-10-03 06:21:12 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? Hal Eckhart 2004-10-03 07:45:32 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? turbulatordude 2004-10-03 13:29:12 UTC Re: steel tubing strenght formulas ?? Raymond Heckert 2004-10-03 17:32:37 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? Tom Hubin 2004-10-03 22:34:44 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? Michael Moore 2004-10-04 06:53:01 UTC Re: steel tubing strenght formulas ?? Hal Eckhart 2004-10-05 21:56:58 UTC Re: [CAD_CAM_EDM_DRO] steel tubing strenght formulas ?? turbulatordude 2004-10-06 01:30:54 UTC Re: steel tubing strenght formulas ?? metlmunchr 2004-10-06 08:46:50 UTC Re: steel tubing strenght formulas ?? turbulatordude 2004-10-06 09:43:36 UTC Re: steel tubing strenght formulas ?? plasma table