lead screw selection
Posted by
John Labutski
on 2004-10-13 10:03:46 UTC
I have a home brew project and would like to use ballscrews. Since I
don't require super precision accuracy (only Plus or minus .015" per
foot), can any one recommend a brand and source of economical lead
screws and ball nuts in the 5/8ths inch range? Travel required is
only 10x10 inches on an x-y platform. I only need a useful life of
about 300 hours run time on the project.
Thanks in advance for any replies.
John Ocala Florida
don't require super precision accuracy (only Plus or minus .015" per
foot), can any one recommend a brand and source of economical lead
screws and ball nuts in the 5/8ths inch range? Travel required is
only 10x10 inches on an x-y platform. I only need a useful life of
about 300 hours run time on the project.
Thanks in advance for any replies.
John Ocala Florida
Discussion Thread
John Labutski
2004-10-13 10:03:46 UTC
lead screw selection
Ron Steele
2004-10-13 11:42:06 UTC
Re: lead screw selection
c123666
2004-10-13 14:47:18 UTC
recommendation for machine
Marcus
2004-10-13 17:35:31 UTC
Re: [CAD_CAM_EDM_DRO] recommendation for machine
TomP
2004-10-13 18:42:06 UTC
Re: [CAD_CAM_EDM_DRO] recommendation for machine
R Rogers
2004-10-14 09:00:46 UTC
Re: [CAD_CAM_EDM_DRO] recommendation for machine
aerowright
2004-10-14 09:48:35 UTC
Re: recommendation for machine
metlmunchr
2004-10-14 13:03:35 UTC
Re: recommendation for machine
Raymond Heckert
2004-10-14 19:34:40 UTC
Re: [CAD_CAM_EDM_DRO] recommendation for machine
Eric Quarnstrom
2004-10-15 09:05:18 UTC
RE: [CAD_CAM_EDM_DRO] Re: lead screw selection - corrosion resistant or not
Ron
2004-10-15 19:42:46 UTC
Re: lead screw selection - corrosion resistant or not
John Labutski
2004-10-16 06:42:45 UTC
Re: lead screw selection