Re: lead screw selection

John,

Check out McMaster Carr #5966k26 and #5966k16 for an inexspensive
5/8" ball screw.

Ron Steele
http://www.stirlingsteele.com/millplans.html

==================================================
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "John Labutski" <kd6wd@c...>
wrote:

>
>
> I have a home brew project and would like to use ballscrews. Since

I

> don't require super precision accuracy (only Plus or minus .015"

per

> foot), can any one recommend a brand and source of economical lead
> screws and ball nuts in the 5/8ths inch range? Travel required is
> only 10x10 inches on an x-y platform. I only need a useful life of
> about 300 hours run time on the project.
>
> Thanks in advance for any replies.
>
> John Ocala Florida