CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Reversing switch-

on 2004-12-15 20:36:32 UTC
On Wednesday 15 December 2004 06:21 pm, Michael Wood, Cincinnati wrote:
> You want either a single throw double pole switch or a double throw
> double pole double throw toggle switch (you just don't use one of the
> poles)--

This is incorrect. You cannot exchange _two_ wires with a single pole switch.

> between $5 and $10. I think Loews has them in the electrical
> section with the Gardner-Bender stuff. You could use a "3 way" light
> switch, which does the same thing. Basically one position allows for a
> straight through feed, while the other position crosses them.

A "3-way" switch is just a single-pole, double-throw switch.

> There's a guy who has a really nice switch page that will help:
> http://www.kpsec.freeuk.com/components/switch.htm
> A picture is worth a thousand words
> Mike Wood, Cincinnati

Yep. I looked at that, before I wrote this.

> Are you kidding??? wrote:
> >I would like to add a reversing switch to my Grizzly Mill. I can
> >remove the cover on the electrical box located on the back of the
> >machine and there is a sticker that states. "To reverse spindle
> >direction, switch position of wire #5 and #6" I did this and it
> >worked. What kind of switch do I need to add that can reverse
> >direction rather then having to manually switch the wires?

Discussion Thread

Are you kidding??? 2004-12-15 13:12:51 UTC Reversing switch- Roy J. Tellason 2004-12-15 13:27:07 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- JanRwl@A... 2004-12-15 13:31:32 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Alan Marconett 2004-12-15 14:15:25 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- John J. Clark 2004-12-15 14:22:53 UTC RE: [CAD_CAM_EDM_DRO] Reversing switch- John J. Clark 2004-12-15 14:31:11 UTC RE: [CAD_CAM_EDM_DRO] Reversing switch- Michael Wood, Cincinnati 2004-12-15 18:07:45 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Roy J. Tellason 2004-12-15 20:36:32 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Stephen Wille Padnos 2004-12-15 20:59:15 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Raymond Heckert 2004-12-15 21:26:18 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Wayne 2004-12-16 03:38:10 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Wayne 2004-12-16 03:41:27 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Michael Wood, Cincinnati 2004-12-16 06:17:47 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Andy Wander 2004-12-16 06:25:02 UTC RE: [CAD_CAM_EDM_DRO] Reversing switch- Michael Wood, Cincinnati 2004-12-16 06:29:49 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Andy Wander 2004-12-16 06:45:22 UTC RE: [CAD_CAM_EDM_DRO] Reversing switch- Michael Wood, Cincinnati 2004-12-16 07:37:16 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Michael Wood, Cincinnati 2004-12-16 07:38:45 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Stephen Wille Padnos 2004-12-16 07:49:02 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Dave Fisher 2004-12-16 14:34:41 UTC RE: [CAD_CAM_EDM_DRO] Reversing switch- JanRwl@A... 2004-12-16 16:42:15 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- turbulatordude 2004-12-16 17:47:11 UTC Re: Reversing switch-