CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Reversing switch-

on 2004-12-15 20:59:15 UTC
Roy J. Tellason wrote:

>On Wednesday 15 December 2004 06:21 pm, Michael Wood, Cincinnati wrote:
>
>
>>You want either a single throw double pole switch or a double throw
>>double pole double throw toggle switch (you just don't use one of the
>>poles)--
>>
>>
>This is incorrect. You cannot exchange _two_ wires with a single pole switch.
>
>
>>between $5 and $10. I think Loews has them in the electrical
>>section with the Gardner-Bender stuff. You could use a "3 way" light
>>switch, which does the same thing. Basically one position allows for a
>>straight through feed, while the other position crosses them.
>>
>>
>
>A "3-way" switch is just a single-pole, double-throw switch.
>[snip]
>
In fact, to expand on this - you can't even use a "4-way" switch. Those
swap two wires, but both wires are always connected. You could use one
of these to change direction only if you have a separate start/stop control.

- Steve

Discussion Thread

Are you kidding??? 2004-12-15 13:12:51 UTC Reversing switch- Roy J. Tellason 2004-12-15 13:27:07 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- JanRwl@A... 2004-12-15 13:31:32 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Alan Marconett 2004-12-15 14:15:25 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- John J. Clark 2004-12-15 14:22:53 UTC RE: [CAD_CAM_EDM_DRO] Reversing switch- John J. Clark 2004-12-15 14:31:11 UTC RE: [CAD_CAM_EDM_DRO] Reversing switch- Michael Wood, Cincinnati 2004-12-15 18:07:45 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Roy J. Tellason 2004-12-15 20:36:32 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Stephen Wille Padnos 2004-12-15 20:59:15 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Raymond Heckert 2004-12-15 21:26:18 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Wayne 2004-12-16 03:38:10 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Wayne 2004-12-16 03:41:27 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Michael Wood, Cincinnati 2004-12-16 06:17:47 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Andy Wander 2004-12-16 06:25:02 UTC RE: [CAD_CAM_EDM_DRO] Reversing switch- Michael Wood, Cincinnati 2004-12-16 06:29:49 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Andy Wander 2004-12-16 06:45:22 UTC RE: [CAD_CAM_EDM_DRO] Reversing switch- Michael Wood, Cincinnati 2004-12-16 07:37:16 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Michael Wood, Cincinnati 2004-12-16 07:38:45 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Stephen Wille Padnos 2004-12-16 07:49:02 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- Dave Fisher 2004-12-16 14:34:41 UTC RE: [CAD_CAM_EDM_DRO] Reversing switch- JanRwl@A... 2004-12-16 16:42:15 UTC Re: [CAD_CAM_EDM_DRO] Reversing switch- turbulatordude 2004-12-16 17:47:11 UTC Re: Reversing switch-