Re: Wood Router clearing chips
Posted by
John Meissner
on 2004-12-20 08:35:21 UTC
Hi Ron,
you could also try installing a small "low volume-high pressure"
air nozzle pointed at the cutter to blow out chips as they are
produced. Maybe a vacuum in conjunction to prevent clouds of dust.
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Ron Ginger"
<ronginger@a...> wrote:
you could also try installing a small "low volume-high pressure"
air nozzle pointed at the cutter to blow out chips as they are
produced. Maybe a vacuum in conjunction to prevent clouds of dust.
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Ron Ginger"
<ronginger@a...> wrote:
> Ive just finsihed a new wood router to make model parts. It is16"x32" and I
> want to do most of my cutting with the smallest possible bit- Idlike a
> laser, but thats another project. Im going to cut mostly thinstuff- 3mm
> plywood, 1/16 basswood and some plastic sheet.at about 15
>
> I have ground a single lip 1/16" dia tools and it cuts very well
> in/min and .100" deep But it leaves the cut path tightly packedwith chips.
> It cant be cutting clean with all those old chips stuck there.chips
>
> What will help clear the chips? I treid slower feeds, but then the
> burn and smoke, obviously worse. I tried faster and the tool seemsto 'swin'
> around a bit, causing errors in the cut line.
>
> Pic of the machine are at http://plsntcov.8m.com/CNCrouter.htm
>
> ron ginger
Discussion Thread
Ron Ginger
2004-12-20 06:46:40 UTC
Wood Router clearing chips
caudlet
2004-12-20 08:25:37 UTC
Re: Wood Router clearing chips
turbulatordude
2004-12-20 08:32:28 UTC
Re: Wood Router clearing chips
John Meissner
2004-12-20 08:35:21 UTC
Re: Wood Router clearing chips
Amaury Jacquot
2004-12-20 09:14:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Router clearing chips
turbulatordude
2004-12-20 10:00:38 UTC
Re: Wood Router clearing chips
AbbyKatt
2004-12-20 10:59:03 UTC
Suggested velcotity params for servos?
R Rogers
2004-12-20 11:42:29 UTC
Re: [CAD_CAM_EDM_DRO] Suggested velcotity params for servos?
Les Newell
2004-12-20 13:16:10 UTC
Re: [CAD_CAM_EDM_DRO] Suggested velcotity params for servos?
Torsten
2004-12-20 14:08:58 UTC
Re: Suggested velcotity params for servos?
A. G. Eckstein
2004-12-20 15:18:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Suggested velcotity params for servos?
JanRwl@A...
2004-12-20 19:39:38 UTC
Re: [CAD_CAM_EDM_DRO] Wood Router clearing chips
David A. Frantz
2004-12-20 19:54:48 UTC
Re: [CAD_CAM_EDM_DRO] Wood Router clearing chips
salsaman59@s...
2004-12-21 00:23:05 UTC
Re: [CAD_CAM_EDM_DRO] Wood Router clearing chips
Ron Kline
2004-12-22 16:38:35 UTC
Delagrange Technology LLC ??
R Rogers
2004-12-22 18:00:34 UTC
Re: [CAD_CAM_EDM_DRO] Delagrange Technology LLC ??
Ron Kline
2004-12-22 18:22:17 UTC
Re: [CAD_CAM_EDM_DRO] Delagrange Technology LLC ??
Bob McKnight
2004-12-26 10:54:07 UTC
Re: [CAD_CAM_EDM_DRO] Wood Router clearing chips
Torsten
2004-12-26 22:29:01 UTC
Re: Wood Router clearing chips
turbulatordude
2004-12-27 06:11:14 UTC
Re: Wood Router clearing chips
doug98105
2004-12-27 08:37:59 UTC
Re: Wood Router clearing chips
Ron Ginger
2004-12-27 19:23:33 UTC
Re: Wood Router clearing chips
JanRwl@A...
2004-12-27 22:45:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Wood Router clearing chips