CAD CAM EDM DRO - Yahoo Group Archive

Re: Wanted: Servo Motors that interface to Gecko 320

on 2004-12-29 18:54:55 UTC
IT seems this post did not get much play today. I assume it was
because this topic has been covered in depth in the last week and a
half.

Search the archives for servo and follow the threads and you will
find not only links, but all the engineering needed to select the
best motors.

Of course, if someone has done the conversion wants to post motor
sizes, please do so !

Dave




--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Joel" <chopper_joel@y...>
wrote:
>
> Hello,
>
> I am looking for a couple of servo motors that will interface to
> Gecko G320 Servo Drivers.
>
> 2 small-med sized for X and Y axis on my CNC mill and 1 med-larger
> for a Lathe CNC conversion that I am just starting on. I work
with
> steppers motors but do not know much about servos.
>
> If someone could recommend tourqe parameters and such, that would
> also be very helpfull. Supplier names or individuals looking to
sell.
>
> You can see my Mill that I am looking to upgrade and the new Lathe
> project at:
> http://www.jhchoppers.com/cnc/
>
> If you want to email me off-line, thats OK too.
>
> Thanks for your help,
> Joel

Discussion Thread

Joel 2004-12-29 08:12:11 UTC Wanted: Servo Motors that interface to Gecko 320 turbulatordude 2004-12-29 18:54:55 UTC Re: Wanted: Servo Motors that interface to Gecko 320 R Rogers 2004-12-30 06:47:08 UTC Re: [CAD_CAM_EDM_DRO] Wanted: Servo Motors that interface to Gecko 320 John Meissner 2004-12-30 09:12:12 UTC Re: Wanted: Servo Motors that interface to Gecko 320-Ron R Rogers 2004-12-30 15:42:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Wanted: Servo Motors that interface to Gecko 320-Ron Jon Elson 2004-12-30 18:44:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Wanted: Servo Motors that interface to Gecko 320-Ron shadi_salhab_78 2005-01-01 09:57:55 UTC Re: Wanted: Servo Motors that interface to Gecko 320 vrsculptor 2005-01-01 11:09:16 UTC Re: Wanted: Servo Motors that interface to Gecko 320 Fred Smith 2005-01-01 11:36:40 UTC Re: Wanted: Servo Motors that interface to Gecko 320 John Guenther 2005-01-01 11:53:39 UTC RE: [CAD_CAM_EDM_DRO] Re: Wanted: Servo Motors that interface to Gecko 320 R Rogers 2005-01-01 12:20:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Wanted: Servo Motors that interface to Gecko 320 Roy J. Tellason 2005-01-01 14:33:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Wanted: Servo Motors that interface to Gecko 320