Re: Power supply for Servos - Energy dump and such - UR...
Posted by
turbulatordude
on 2005-02-21 09:27:58 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Polaraligned"
<polaraligned@o...> wrote:
board guys to put in an E-stop.
The more elaborate chip version appears to do a similar thing.
One difference is the automatic design does not have the e-stop lock-
out.
But, it seems that if you were to just add a push/pull switch as the
e-stop the automatic version would handle the rest.
Dave
<polaraligned@o...> wrote:
>stop
>
> > In regards to application, I am making both the relay based E-
> > and the independent return voltage dump circuit.The relay based E-stop offers a simple method for the non-circuit
> >
> > Hope that sheds a little light on the subject.
> >
> > Dave
>
> OK. But version 3, the one with the comparator, says that it
> rapidly discharges the main capacitor when AC power is removed.
> So should this not render the relay based circuit redundant?
> It would then seem to me that an ordinary switch to cut off
> power would be enough. Am I missing something?
>
> Thanks,
> Scott
board guys to put in an E-stop.
The more elaborate chip version appears to do a similar thing.
One difference is the automatic design does not have the e-stop lock-
out.
But, it seems that if you were to just add a push/pull switch as the
e-stop the automatic version would handle the rest.
Dave
Discussion Thread
wanliker@a...
2005-02-19 13:07:58 UTC
Power supply for Servos - Energy dump and such - UR...
Stephen Wille Padnos
2005-02-19 13:30:18 UTC
Re: [CAD_CAM_EDM_DRO] Power supply for Servos - Energy dump and such - UR...
wanliker@a...
2005-02-19 13:55:20 UTC
Re: [CAD_CAM_EDM_DRO] Power supply for Servos - Energy dump and such - UR...
cnc_4_me
2005-02-19 14:11:26 UTC
Re: Power supply for Servos - Energy dump and such - UR...
Stephen Wille Padnos
2005-02-19 14:36:42 UTC
Re: [CAD_CAM_EDM_DRO] Power supply for Servos - Energy dump and such - UR...
turbulatordude
2005-02-19 15:34:24 UTC
Re: Power supply for Servos - Energy dump and such - UR...
Stephen Wille Padnos
2005-02-19 19:41:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such - UR...
turbulatordude
2005-02-19 21:16:13 UTC
Re: Power supply for Servos - Energy dump and such - UR...
Polaraligned
2005-02-21 04:56:23 UTC
Re: Power supply for Servos - Energy dump and such - UR...
R Rogers
2005-02-21 05:48:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such - UR...
turbulatordude
2005-02-21 07:12:06 UTC
Re: Power supply for Servos - Energy dump and such - UR...
Polaraligned
2005-02-21 08:48:45 UTC
Re: Power supply for Servos - Energy dump and such - UR...
turbulatordude
2005-02-21 09:27:58 UTC
Re: Power supply for Servos - Energy dump and such - UR...
Jon Elson
2005-02-21 11:05:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such - UR...
turbulatordude
2005-02-21 11:18:38 UTC
Re: Power supply for Servos - Energy dump and such - UR...
Polaraligned
2005-02-21 11:23:23 UTC
Re: Power supply for Servos - Energy dump and such - UR...
turbulatordude
2005-02-21 12:01:03 UTC
Re: Power supply for Servos - Energy dump and such - UR...
Mariss Freimanis
2005-02-21 14:43:18 UTC
Re: Power supply for Servos - Energy dump and such - UR...
Polaraligned
2005-02-22 13:53:39 UTC
Re: Power supply for Servos - Energy dump and such - UR...
R Rogers
2005-02-22 14:13:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such - UR...