CAD CAM EDM DRO - Yahoo Group Archive

Re: Question on Mariss' E-Stop circuit

Posted by Monte
on 2005-03-10 05:54:52 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, R Rogers <rogersmach@y...> wrote:
> I'm running large servos and using a 5 to 10 adjustable resistor set
to 7 ohms and it works good. If his plan said to use 2.8 ohms thats
probably what it needs.
> Ron
>

He's called out R = V/10 for the resistor. But with the speeds this
mill is going, just shutting the power off brings it to a pretty quick
stop.

Monte

Discussion Thread

Monte 2005-03-09 05:43:59 UTC Question on Mariss' E-Stop circuit turbulatordude 2005-03-09 06:13:47 UTC Re: Question on Mariss' E-Stop circuit Monte 2005-03-09 19:19:33 UTC Re: Question on Mariss' E-Stop circuit R Rogers 2005-03-09 19:26:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Question on Mariss' E-Stop circuit Monte 2005-03-09 19:32:29 UTC Re: Question on Mariss' E-Stop circuit Monte 2005-03-09 19:36:32 UTC Re: Question on Mariss' E-Stop circuit R Rogers 2005-03-10 04:33:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Question on Mariss' E-Stop circuit Monte 2005-03-10 05:54:52 UTC Re: Question on Mariss' E-Stop circuit turbulatordude 2005-03-10 08:14:48 UTC Re: Question on Mariss' E-Stop circuit Monte 2005-03-11 05:55:36 UTC Re: Question on Mariss' E-Stop circuit turbulatordude 2005-03-11 06:59:46 UTC Re: Question on Mariss' E-Stop circuit