CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Digest Number 4217

Posted by Dave Shiels
on 2005-03-23 22:23:04 UTC
One also needs to consider the possiblity of "charging" the cast iron
when lapping. Generally lapping in a precision machine shop is a hard
steel surface being lapped by a charged cast iron one. Cast iron is
pretty soft and the surface can become embedded with lapping compound.
Be afraid of abrasives on your cast iron parts. Lapping compund can
actually bite into the surface of cast iron.

R Rogers wrote:

>
>turbulatordude <dave_mucha@...> wrote:
>
>ps: People who call a ball bearing center in a tailstock a live
>center is my favorite incorrect use of words.
>
>/// A tailstock center with bearings and rotates with the work is a "live" center. A center without bearings is a "dead" center and must be greased as it does not rotate with the work.
>
>Ron
>
>
>
>
>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>

Discussion Thread

Ron Ginger 2005-03-23 06:41:18 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 4217 turbulatordude 2005-03-23 07:23:03 UTC Re: Digest Number 4217 turbulatordude 2005-03-23 07:53:36 UTC Re: Digest Number 4217 R Rogers 2005-03-23 08:29:59 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 4217 R Rogers 2005-03-23 08:53:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Digest Number 4217 Dave Shiels 2005-03-23 08:56:52 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 4217 Dave Shiels 2005-03-23 22:23:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Digest Number 4217 turbulatordude 2005-03-23 22:31:26 UTC Re: Digest Number 4217 Bill Vance 2005-03-24 03:33:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Digest Number 4217 Dan Mauch 2005-03-24 06:11:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Digest Number 4217