Re: [CAD_CAM_EDM_DRO] power supply question
Posted by
ernie
on 2005-04-19 10:45:24 UTC
Not at all... it will take a second or two more to discharge. Don't touch
the capacitors terminals after a voltage has been removed as the capacitor
holds the charge and you will get quite a jolt!
the capacitors terminals after a voltage has been removed as the capacitor
holds the charge and you will get quite a jolt!
----- Original Message -----
From: "cutthroatplasmaco" <cutthroatplasmaco@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, April 19, 2005 1:35 PM
Subject: [CAD_CAM_EDM_DRO] power supply question
>
>
> Hi all,
> Is there anything wrong with running a capacitor on your power supply
> that is somewhat larger (or for that matter, smaller) than what is
> being called for? For instance my calculations call for an 8,000uf cap,
> but I have on hand a 22,000uf... is there anything wrong with using
> that?
> Thanks,
> Chris
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Discussion Thread
Carey L. Culpepper
2000-07-14 18:22:02 UTC
power supply question
Mariss Freimanis
2000-07-15 00:00:19 UTC
Re: power supply question
Alison & Jim Gregg
2000-07-15 07:53:12 UTC
Re: [CAD_CAM_EDM_DRO] power supply question
jrp3@h...
2001-10-27 18:44:56 UTC
power supply question
Jon Elson
2001-10-27 22:34:56 UTC
Re: [CAD_CAM_EDM_DRO] power supply question
seanc62@y...
2001-10-27 22:46:22 UTC
Re: power supply question
cutthroatplasmaco
2005-04-19 10:35:23 UTC
power supply question
ernie
2005-04-19 10:45:24 UTC
Re: [CAD_CAM_EDM_DRO] power supply question
Roger Hampson
2005-04-19 10:48:34 UTC
RE: [CAD_CAM_EDM_DRO] power supply question
Robert Campbell
2005-04-19 11:24:09 UTC
Re: [CAD_CAM_EDM_DRO] power supply question
turbulatordude
2005-04-19 12:54:24 UTC
Re: power supply question - Big Caps
curious925072002
2005-04-20 19:43:19 UTC
Re: power supply question
turbulatordude
2005-04-21 05:31:13 UTC
Re: power supply question
Monte
2005-04-21 05:56:44 UTC
Re: power supply question
turbulatordude
2005-04-21 07:23:10 UTC
Re: power supply question
Monte
2005-04-21 18:05:58 UTC
Re: power supply question