Re: power supply question
Posted by
curious925072002
on 2005-04-20 19:43:19 UTC
Dear Chris,
10,000 or maybe 12,000 is probably OK but 22,000 is too much. I have
been interested in this problem for a long time. Larger capacitors put
additional stress on several components--most seriously on the
transformer--which is, after all, the most expensive component in the
power supply. The exact technical reasons are very interesting to me
but this is not the place to discuss them.
Sincerely,
Barry
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "cutthroatplasmaco"
<cutthroatplasmaco@y...> wrote:
10,000 or maybe 12,000 is probably OK but 22,000 is too much. I have
been interested in this problem for a long time. Larger capacitors put
additional stress on several components--most seriously on the
transformer--which is, after all, the most expensive component in the
power supply. The exact technical reasons are very interesting to me
but this is not the place to discuss them.
Sincerely,
Barry
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "cutthroatplasmaco"
<cutthroatplasmaco@y...> wrote:
>
> Hi all,
> Is there anything wrong with running a capacitor on your power supply
> that is somewhat larger (or for that matter, smaller) than what is
> being called for? For instance my calculations call for an 8,000uf cap,
> but I have on hand a 22,000uf... is there anything wrong with using
> that?
> Thanks,
> Chris
Discussion Thread
Carey L. Culpepper
2000-07-14 18:22:02 UTC
power supply question
Mariss Freimanis
2000-07-15 00:00:19 UTC
Re: power supply question
Alison & Jim Gregg
2000-07-15 07:53:12 UTC
Re: [CAD_CAM_EDM_DRO] power supply question
jrp3@h...
2001-10-27 18:44:56 UTC
power supply question
Jon Elson
2001-10-27 22:34:56 UTC
Re: [CAD_CAM_EDM_DRO] power supply question
seanc62@y...
2001-10-27 22:46:22 UTC
Re: power supply question
cutthroatplasmaco
2005-04-19 10:35:23 UTC
power supply question
ernie
2005-04-19 10:45:24 UTC
Re: [CAD_CAM_EDM_DRO] power supply question
Roger Hampson
2005-04-19 10:48:34 UTC
RE: [CAD_CAM_EDM_DRO] power supply question
Robert Campbell
2005-04-19 11:24:09 UTC
Re: [CAD_CAM_EDM_DRO] power supply question
turbulatordude
2005-04-19 12:54:24 UTC
Re: power supply question - Big Caps
curious925072002
2005-04-20 19:43:19 UTC
Re: power supply question
turbulatordude
2005-04-21 05:31:13 UTC
Re: power supply question
Monte
2005-04-21 05:56:44 UTC
Re: power supply question
turbulatordude
2005-04-21 07:23:10 UTC
Re: power supply question
Monte
2005-04-21 18:05:58 UTC
Re: power supply question