Re: [CAD_CAM_EDM_DRO] CNC polishing with a mill?
Posted by
caedave
on 2005-08-03 08:18:19 UTC
Soft polishing should be no problem but abrasive could mean
having to adjust the path or tool offset due to wear on the polishing tool
(some can disappear at an alarming rate).
Take a look at some CNC Grinders. Though not suitable for your
purpose, should give some ideas on what's required.
On the tool's availability have to say I've never seen any for
use on a Mill.
Dave M.
having to adjust the path or tool offset due to wear on the polishing tool
(some can disappear at an alarming rate).
Take a look at some CNC Grinders. Though not suitable for your
purpose, should give some ideas on what's required.
On the tool's availability have to say I've never seen any for
use on a Mill.
Dave M.
----- Original Message -----
From: "Abby Katt" <cncgroupnospam@...>
Subject: [CAD_CAM_EDM_DRO] CNC polishing with a mill?
> Hi all,
>
> I was wondering if anyone had any suggestions on ways to polish with a
> CNC mill?
> I'm not talking about random-polishing of existing items, but rather,
> polishing as a finish step on a piece that has just been milled and is
> still sitting in the mill....
>
> It seems that you could use the existing toolpath (or create one with
> your CAM package) that would match the geometry and make some nice
> polishing passes over your piece... I'm particularly interested in
> this, because it'd give a good even finish and could potentially be used
> to remove machining marks.. very good as I'd love to be able to
> reliably finish Alu parts on the mill and be able to chuck them straight
> into anodizing...
>
> What would you use tho? Do they make milling polishing tools even?
> ~Abby
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.9.9/62 - Release Date: 02/08/2005
Discussion Thread
Robert Neidorff
1999-06-14 09:08:39 UTC
Re: Servo Motors
Jon Elson
1999-06-14 13:08:36 UTC
Re: Servo Motors
William Scalione
1999-07-13 19:54:46 UTC
Servo Motors
Tim Goldstein
1999-07-13 20:57:51 UTC
RE: Servo Motors
TADGUNINC@a...
1999-07-13 21:07:37 UTC
Re: Servo Motors
IDA
2005-05-04 08:22:42 UTC
Servo Motors
Jymmm
2005-08-02 09:30:20 UTC
Servo Motors
Green, James
2005-08-02 10:14:56 UTC
RE: [CAD_CAM_EDM_DRO] Servo Motors
Stephen Wille Padnos
2005-08-02 10:29:29 UTC
Re: [CAD_CAM_EDM_DRO] Servo Motors
R Rogers
2005-08-02 10:33:25 UTC
Re: [CAD_CAM_EDM_DRO] Servo Motors
Marv Frankel
2005-08-03 01:33:32 UTC
Re: Servo Motors
Abby Katt
2005-08-03 03:31:10 UTC
CNC polishing with a mill?
turbulatordude
2005-08-03 07:35:45 UTC
Re: CNC polishing with a mill?
George Taylor, IV
2005-08-03 07:41:46 UTC
Re: [CAD_CAM_EDM_DRO] CNC polishing with a mill?
Erie Patsellis
2005-08-03 07:46:42 UTC
Re: [CAD_CAM_EDM_DRO] CNC polishing with a mill?
Abby Katt
2005-08-03 08:12:34 UTC
Re: [CAD_CAM_EDM_DRO] CNC polishing with a mill?
caedave
2005-08-03 08:18:19 UTC
Re: [CAD_CAM_EDM_DRO] CNC polishing with a mill?
Doug Pfaff
2005-08-03 08:36:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill?
Abby Katt
2005-08-03 08:41:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill?
Andy Wander
2005-08-03 08:43:51 UTC
RE: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill?
Doug Pfaff
2005-08-03 08:44:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill?
Andy Wander
2005-08-03 08:46:18 UTC
RE: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill?
turbulatordude
2005-08-03 09:14:10 UTC
Re: CNC polishing with a mill?
Jon Elson
2005-08-03 09:19:16 UTC
Re: [CAD_CAM_EDM_DRO] CNC polishing with a mill?
Jon Elson
2005-08-03 09:22:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill?
wanliker@a...
2005-08-03 11:45:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill?
Tom Hubin
2005-08-04 12:03:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill?
turbulatordude
2005-08-04 16:48:19 UTC
Re: CNC polishing with a mill?