CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill?

Posted by Doug Pfaff
on 2005-08-03 08:36:09 UTC
You're referring to engine turning and or
damscening(?).

--- turbulatordude <dave_mucha@...> wrote:

> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Abby Katt
> <cncgroupnospam@s...> wrote:
> > Hi all,
> >
> > I was wondering if anyone had any suggestions on
> ways to polish with a
> > CNC mill?
> > I'm not talking about random-polishing of existing
> items, but rather,
> > polishing as a finish step on a piece that has
> just been milled and is
> > still sitting in the mill....
> >
> > It seems that you could use the existing toolpath
> (or create one with
> > your CAM package) that would match the geometry
> and make some nice
> > polishing passes over your piece... I'm
> particularly interested in
> > this, because it'd give a good even finish and
> could potentially be
> used
> > to remove machining marks.. very good as I'd love
> to be able to
> > reliably finish Alu parts on the mill and be able
> to chuck them
> straight
> > into anodizing...
> >
> > What would you use tho? Do they make milling
> polishing tools even?
> > ~Abby
>
>
> There is a old finish where one takes a round object
> like a pencil
> eraser and hits a spot, lift, move hit, and so on to
> create
> overlapping spots. the idea is to create repetitive
> circular swirls.
> I think airplane dash boards were one application.
>
> Just an idea.
>
> Dave
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe:
> CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru
> Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I
> consider this to be a sister site to the CCED group,
> as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
> DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
> ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
>
>
>
>

Discussion Thread

Robert Neidorff 1999-06-14 09:08:39 UTC Re: Servo Motors Jon Elson 1999-06-14 13:08:36 UTC Re: Servo Motors William Scalione 1999-07-13 19:54:46 UTC Servo Motors Tim Goldstein 1999-07-13 20:57:51 UTC RE: Servo Motors TADGUNINC@a... 1999-07-13 21:07:37 UTC Re: Servo Motors IDA 2005-05-04 08:22:42 UTC Servo Motors Jymmm 2005-08-02 09:30:20 UTC Servo Motors Green, James 2005-08-02 10:14:56 UTC RE: [CAD_CAM_EDM_DRO] Servo Motors Stephen Wille Padnos 2005-08-02 10:29:29 UTC Re: [CAD_CAM_EDM_DRO] Servo Motors R Rogers 2005-08-02 10:33:25 UTC Re: [CAD_CAM_EDM_DRO] Servo Motors Marv Frankel 2005-08-03 01:33:32 UTC Re: Servo Motors Abby Katt 2005-08-03 03:31:10 UTC CNC polishing with a mill? turbulatordude 2005-08-03 07:35:45 UTC Re: CNC polishing with a mill? George Taylor, IV 2005-08-03 07:41:46 UTC Re: [CAD_CAM_EDM_DRO] CNC polishing with a mill? Erie Patsellis 2005-08-03 07:46:42 UTC Re: [CAD_CAM_EDM_DRO] CNC polishing with a mill? Abby Katt 2005-08-03 08:12:34 UTC Re: [CAD_CAM_EDM_DRO] CNC polishing with a mill? caedave 2005-08-03 08:18:19 UTC Re: [CAD_CAM_EDM_DRO] CNC polishing with a mill? Doug Pfaff 2005-08-03 08:36:09 UTC Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill? Abby Katt 2005-08-03 08:41:56 UTC Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill? Andy Wander 2005-08-03 08:43:51 UTC RE: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill? Doug Pfaff 2005-08-03 08:44:47 UTC Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill? Andy Wander 2005-08-03 08:46:18 UTC RE: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill? turbulatordude 2005-08-03 09:14:10 UTC Re: CNC polishing with a mill? Jon Elson 2005-08-03 09:19:16 UTC Re: [CAD_CAM_EDM_DRO] CNC polishing with a mill? Jon Elson 2005-08-03 09:22:06 UTC Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill? wanliker@a... 2005-08-03 11:45:17 UTC Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill? Tom Hubin 2005-08-04 12:03:45 UTC Re: [CAD_CAM_EDM_DRO] Re: CNC polishing with a mill? turbulatordude 2005-08-04 16:48:19 UTC Re: CNC polishing with a mill?