Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.

On 08-Aug-2005, at 23:28, jeff35m_73068 wrote:

> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
>> jeff35m_73068 wrote:
>> ty jon. that helps alot. I new the shunt motor would make more
> torque. I did connect it that way first; the motor did not seem to
> like that connection, and there was a small amount of smoke coming
> from the brush area of the motor.

Motors and electronics run on smoke.
If you let too much of the smoke out, they stop working.

<g>

Regards,
JJ


---
Help everyone. If you can't do that, then at least be nice.