Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
Posted by
Jon Elson
on 2005-08-10 09:34:12 UTC
jeff35m_73068 wrote:
controller with a tachometer for the spindle to hold anything like a
constant
speed. Without it, it would not be unusual for the spindle to slow down 3:1
under load!
Jon
>LOL thats a good one.There's your answer. It clearly is a series motor. You need a closed-loop
>But seriously I don't think this is a shunt motor. There are sparks
>from the brshes and small amounts of continueous smoke when connected
>as a shunt. The field resistance is .013 ohms.
>
controller with a tachometer for the spindle to hold anything like a
constant
speed. Without it, it would not be unusual for the spindle to slow down 3:1
under load!
Jon
Discussion Thread
jeff35m_73068
2005-08-08 14:26:04 UTC
dc spindle motor control.
Jon Elson
2005-08-08 19:08:26 UTC
Re: [CAD_CAM_EDM_DRO] dc spindle motor control.
jeff35m_73068
2005-08-08 20:29:04 UTC
Re: dc spindle motor control.
Jon Elson
2005-08-08 22:20:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
John Johnson
2005-08-09 03:28:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
jeff35m_73068
2005-08-10 07:09:54 UTC
Re: dc spindle motor control.
Jon Elson
2005-08-10 09:34:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
jeff35m_73068
2005-08-10 18:31:33 UTC
Re: dc spindle motor control.
Jon Elson
2005-08-10 22:26:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
Andrey Lipavsky
2005-08-10 22:37:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
Jon Elson
2005-08-11 09:12:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
jeff35m_73068
2005-08-13 12:34:19 UTC
Re: dc spindle motor control.
Jon Elson
2005-08-13 13:05:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
jeff35m_73068
2005-08-14 01:20:54 UTC
Re: dc spindle motor control.
jeff35m_73068
2005-08-14 03:26:09 UTC
Re: dc spindle motor control.
jeff35m_73068
2005-08-14 05:00:37 UTC
Re: dc spindle motor control.
Jon Elson
2005-08-14 14:50:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
Jon Elson
2005-08-14 14:52:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.