Re: dc spindle motor control.
Posted by
jeff35m_73068
on 2005-08-10 18:31:33 UTC
I picked up a 500 watt reostat to control this manually. Is the
lowering of field voltage goint to produce the increase in speed I
want? What type of control would you suggest? Do you think it
possible the fields run off the 3rd wire from the armature?
lowering of field voltage goint to produce the increase in speed I
want? What type of control would you suggest? Do you think it
possible the fields run off the 3rd wire from the armature?
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
> jeff35m_73068 wrote:
>
> >LOL thats a good one.
> >But seriously I don't think this is a shunt motor. There are
sparks
> >from the brshes and small amounts of continueous smoke when
connected
> >as a shunt. The field resistance is .013 ohms.
> >
> There's your answer. It clearly is a series motor. You need a
closed-loop
> controller with a tachometer for the spindle to hold anything like
a
> constant
> speed. Without it, it would not be unusual for the spindle to slow
down 3:1
> under load!
>
> Jon
Discussion Thread
jeff35m_73068
2005-08-08 14:26:04 UTC
dc spindle motor control.
Jon Elson
2005-08-08 19:08:26 UTC
Re: [CAD_CAM_EDM_DRO] dc spindle motor control.
jeff35m_73068
2005-08-08 20:29:04 UTC
Re: dc spindle motor control.
Jon Elson
2005-08-08 22:20:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
John Johnson
2005-08-09 03:28:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
jeff35m_73068
2005-08-10 07:09:54 UTC
Re: dc spindle motor control.
Jon Elson
2005-08-10 09:34:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
jeff35m_73068
2005-08-10 18:31:33 UTC
Re: dc spindle motor control.
Jon Elson
2005-08-10 22:26:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
Andrey Lipavsky
2005-08-10 22:37:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
Jon Elson
2005-08-11 09:12:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
jeff35m_73068
2005-08-13 12:34:19 UTC
Re: dc spindle motor control.
Jon Elson
2005-08-13 13:05:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
jeff35m_73068
2005-08-14 01:20:54 UTC
Re: dc spindle motor control.
jeff35m_73068
2005-08-14 03:26:09 UTC
Re: dc spindle motor control.
jeff35m_73068
2005-08-14 05:00:37 UTC
Re: dc spindle motor control.
Jon Elson
2005-08-14 14:50:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.
Jon Elson
2005-08-14 14:52:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: dc spindle motor control.