Re: dc spindle motor control.

LOL thats a good one.
But seriously I don't think this is a shunt motor. There are sparks
from the brshes and small amounts of continueous smoke when connected
as a shunt. The field resistance is .013 ohms. The wires from the
motor are marked; A,H,BG for the armature, and K,J on the field. It
is a Fuji electric motor, and what is left of the controler says DSP
83 controller (Fuji electric). Anyone heard of that? thks Jeff

In CAD_CAM_EDM_DRO@yahoogroups.com, John Johnson <johnatl@m...> wrote:

> On 08-Aug-2005, at 23:28, jeff35m_73068 wrote:
>
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...>

wrote:

> >> jeff35m_73068 wrote:
> >> ty jon. that helps alot. I new the shunt motor would make more
> > torque. I did connect it that way first; the motor did not seem to
> > like that connection, and there was a small amount of smoke coming
> > from the brush area of the motor.
>
> Motors and electronics run on smoke.
> If you let too much of the smoke out, they stop working.
>
> <g>
>
> Regards,
> JJ
>
>
> ---
> Help everyone. If you can't do that, then at least be nice.