Re: [CAD_CAM_EDM_DRO] AC Servo's
Posted by
Roy J. Tellason
on 2005-08-13 08:51:02 UTC
On Friday 12 August 2005 11:32 pm, Jon Elson wrote:
some way? Not exactly real high up on my list, I have a couple of units in
my box of motors that have encoders mounted on them, and you've got me
wondering...
> >I'd probably prefer a digital setup, but fear I may have to change bothAre you saying here that the encoders are also likely to be proprietary in
> >motors and drives?
>
> Yes, keeping the drives is the best option, if possible. Some drives can
> accomodate a variety of motors, others are strictly proprietary. You need
> to check if the encoder has standard commutation outputs, or if the motor
> provides these (the typical Hall A,B C outputs.) Yaskawa servo pack
> drives use a proprietary scheme where the "Z" channel of the encoder has
> a phase relationship to the A and B encoder tracks that gives the drive
> the index position as well as the commutation info. So, both the drives
> and the motors are totally proprietary, and can't be used with anything
> else. A number of other makers have similar schemes.
some way? Not exactly real high up on my list, I have a couple of units in
my box of motors that have encoders mounted on them, and you've got me
wondering...
Discussion Thread
Wayne Weedon
2005-08-12 13:40:23 UTC
AC Servo's
Jon Elson
2005-08-12 20:33:27 UTC
Re: [CAD_CAM_EDM_DRO] AC Servo's
Wayne Weedon
2005-08-13 05:00:11 UTC
Re: [CAD_CAM_EDM_DRO] AC Servo's
Roy J. Tellason
2005-08-13 08:51:02 UTC
Re: [CAD_CAM_EDM_DRO] AC Servo's
Jon Elson
2005-08-13 13:00:38 UTC
Re: [CAD_CAM_EDM_DRO] AC Servo's
Wayne Weedon
2005-08-13 15:00:50 UTC
Re: [CAD_CAM_EDM_DRO] AC Servo's
Jon Elson
2005-08-13 18:50:46 UTC
Re: [CAD_CAM_EDM_DRO] AC Servo's
Beau Beaufait
2005-08-14 07:44:05 UTC
Re: [CAD_CAM_EDM_DRO] AC Servo's
Wayne Weedon
2005-08-14 11:22:06 UTC
[CAD_CAM_EDM_DRO] AC Servo's (Leadwell update)
Jon Elson
2005-08-14 14:57:06 UTC
Re: [CAD_CAM_EDM_DRO] AC Servo's
Jon Elson
2005-08-14 15:03:40 UTC
Re: [CAD_CAM_EDM_DRO] AC Servo's (Leadwell update)
Wayne Weedon
2005-08-14 16:26:01 UTC
Re: [CAD_CAM_EDM_DRO] AC Servo's (Leadwell update)
happymarius
2006-09-10 07:24:34 UTC
AC Servo's
caudlet
2006-09-10 07:49:29 UTC
Re: AC Servo's
Dan Mauch
2006-09-10 08:25:11 UTC
Re: [CAD_CAM_EDM_DRO] AC Servo's
m37grady
2006-09-10 20:31:22 UTC
Re: AC Servo's
BRIAN FOLEY
2006-09-10 21:16:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: AC Servo's
Les Newell
2006-09-11 02:00:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: AC Servo's
Dan Mauch
2006-09-11 07:38:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: AC Servo's
skykotech
2006-09-11 18:27:07 UTC
Re: AC Servo's