CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] AC Servo's

Posted by Dan Mauch
on 2006-09-10 08:25:11 UTC
If the signal input is step and direction then there isn't much of a problem
getting the sevos to work with Mach3. On the other hand if they are analog
then you will need an analog to step and direction converter. See
www.skyco.com for a low cost solution
Dan Mauch
low cost stepper and servo motors.
cases for Gecko drives
kits and assembled 3-4 axis drives
www.camtronics-cnc.com
www.seanet.com/~dmauch
----- Original Message -----
From: "happymarius" <happymarius@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, September 10, 2006 7:04 AM
Subject: [CAD_CAM_EDM_DRO] AC Servo's


>
>
> HI guys!
>
> I have a knee mill BP (clone)10 X 50 table that I would like to
> convert to CNC.
> The decision has been made : the controler (software ) will be Mach 3
> ( or Mach 4). I have three AC servos geared (100 to 1), 0.55 Kw, 3000
> RPM, 230 V that I would like to use.
> My question is how I link the software to the AC Servo's? Seen that
> all the details are for DC STEPPERS not AC SERVO'S I couldn't find
> anything in that respect.
>
> I appreciate any inputs !
>
> Best regards,
>
> Marius
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>

Discussion Thread

Wayne Weedon 2005-08-12 13:40:23 UTC AC Servo's Jon Elson 2005-08-12 20:33:27 UTC Re: [CAD_CAM_EDM_DRO] AC Servo's Wayne Weedon 2005-08-13 05:00:11 UTC Re: [CAD_CAM_EDM_DRO] AC Servo's Roy J. Tellason 2005-08-13 08:51:02 UTC Re: [CAD_CAM_EDM_DRO] AC Servo's Jon Elson 2005-08-13 13:00:38 UTC Re: [CAD_CAM_EDM_DRO] AC Servo's Wayne Weedon 2005-08-13 15:00:50 UTC Re: [CAD_CAM_EDM_DRO] AC Servo's Jon Elson 2005-08-13 18:50:46 UTC Re: [CAD_CAM_EDM_DRO] AC Servo's Beau Beaufait 2005-08-14 07:44:05 UTC Re: [CAD_CAM_EDM_DRO] AC Servo's Wayne Weedon 2005-08-14 11:22:06 UTC [CAD_CAM_EDM_DRO] AC Servo's (Leadwell update) Jon Elson 2005-08-14 14:57:06 UTC Re: [CAD_CAM_EDM_DRO] AC Servo's Jon Elson 2005-08-14 15:03:40 UTC Re: [CAD_CAM_EDM_DRO] AC Servo's (Leadwell update) Wayne Weedon 2005-08-14 16:26:01 UTC Re: [CAD_CAM_EDM_DRO] AC Servo's (Leadwell update) happymarius 2006-09-10 07:24:34 UTC AC Servo's caudlet 2006-09-10 07:49:29 UTC Re: AC Servo's Dan Mauch 2006-09-10 08:25:11 UTC Re: [CAD_CAM_EDM_DRO] AC Servo's m37grady 2006-09-10 20:31:22 UTC Re: AC Servo's BRIAN FOLEY 2006-09-10 21:16:46 UTC Re: [CAD_CAM_EDM_DRO] Re: AC Servo's Les Newell 2006-09-11 02:00:29 UTC Re: [CAD_CAM_EDM_DRO] Re: AC Servo's Dan Mauch 2006-09-11 07:38:08 UTC Re: [CAD_CAM_EDM_DRO] Re: AC Servo's skykotech 2006-09-11 18:27:07 UTC Re: AC Servo's