RE: [CAD_CAM_EDM_DRO] skate bearings

Allen heads are about .002 under nominal or in this case about .310 +/-.
8mm is .31496 so it looks like you'll have about .004 clearance. You'd most
likely do better to get an 8mm socket head that would be around .312
diameter.
R. Wink

> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com]On Behalf Of turbulatordude
> Sent: Tuesday, August 16, 2005 3:45 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] skate bearings
>
>
> Hi all,
>
> I'm looking at using some skate bearings in a project.
>
> 8mm is darn close to 5/16 and I was wonderng if anyone knows just how
> tight a fit they would be with Allen head cap screw ?
>
> Willing to listen to any suggestions to get a solid support.
>
> Dave

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.10/73 - Release Date: 8/15/2005