CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Newbie: Seeking clarification on the technology used

on 2005-08-29 12:52:23 UTC
Leslie,
First, I went out to your website and noticed some bad links for several of
your pictures. Most of the site loads well, just a couple "problem
children". You may wish to take a look.

Second, please let me know where you get the "very inexpensive, almost free"
micrometers and micrometer heads?

Thanks,
Andrey Lipavsky

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of leslie watts
Sent: Monday, August 29, 2005 3:34 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Newbie: Seeking clarification on the
technology used

The microscopes I had used micrometer heads.
Imported micrometers and micrometer heads are very
inexpensive, almost free.

Spring load a table to them and drive with a spline or timing belt
pulley with width enough to accomodate the stage motion and you could
have a few micron resolution and repeatability over 25 mm.

Leslie M.Watts
L M Watts Furniture
Tiger Georgia
(706) 212-0242

Main page:
http://www.lmwatts.com
Engineering:
http://www.lmwatts.com/shop.html
Cnc surplus for sale:
http://www.lmwatts.com/forsale.html
Carved signs:
http://www.lmwatts.com/signwp.html


-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com]On Behalf Of hc08jb8
Sent: Monday, August 29, 2005 1:07 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Newbie: Seeking clarification on the
technology used


Hello Guys

I would like to build a automated X-Y stage for my microscope, the
commercial ones are way off my budget. I hope to work with some
mechanical guys on this as I have no experience in this area.

I would like the stage to move in maximum of 30mm in X/Y direction,
with a precision of 10uM per step. For such a configuration, what sort
of stepper motor is used? Without having to build much of it, would it
be possible to buy major stuff like the X/Y rods off the shelf? Any
pointers is appriciated

Thank you for your time.
Jay






Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links









Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

hc08jb8 2005-08-29 11:22:47 UTC Newbie: Seeking clarification on the technology used turbulatordude 2005-08-29 11:27:37 UTC Re: Newbie: Seeking clarification on the technology used hc08jb8 2005-08-29 11:40:09 UTC Re: Newbie: Seeking clarification on the technology used Bob Muse 2005-08-29 12:08:36 UTC Re: [CAD_CAM_EDM_DRO] Newbie: Seeking clarification on the technology used leslie watts 2005-08-29 12:34:17 UTC RE: [CAD_CAM_EDM_DRO] Newbie: Seeking clarification on the technology used Andrey Lipavsky 2005-08-29 12:52:23 UTC RE: [CAD_CAM_EDM_DRO] Newbie: Seeking clarification on the technology used leslie watts 2005-08-29 14:56:41 UTC RE: [CAD_CAM_EDM_DRO] Newbie: Seeking clarification on the technology used