Brushless motors from models and such
Posted by
turbulatordude
on 2005-09-03 10:29:58 UTC
Hi all,
I have been trying to find information on these small hobby motors and
have come up pretty empty.
It seems there is not listing or charts that show what sizes are
available, surprizing that I didn't find manufacturers with such data.
Also, I have not found the electronical link between the controllers
and the R/C receiver. One guy at tech suppport said he thought it was
0-5 volts, but was not sure.
Does anyone know of any hobby lists or other sources of information
were the guys would actually know how the parts work ? it seems the
whole hobby is orienteated towards using the toys and not engineering
them. (just opposite of this list)
Dave
I have been trying to find information on these small hobby motors and
have come up pretty empty.
It seems there is not listing or charts that show what sizes are
available, surprizing that I didn't find manufacturers with such data.
Also, I have not found the electronical link between the controllers
and the R/C receiver. One guy at tech suppport said he thought it was
0-5 volts, but was not sure.
Does anyone know of any hobby lists or other sources of information
were the guys would actually know how the parts work ? it seems the
whole hobby is orienteated towards using the toys and not engineering
them. (just opposite of this list)
Dave
Discussion Thread
turbulatordude
2005-09-03 10:29:58 UTC
Brushless motors from models and such
caedave
2005-09-03 10:54:17 UTC
Re: [CAD_CAM_EDM_DRO] Brushless motors from models and such
Roy J. Tellason
2005-09-03 11:27:31 UTC
Re: [CAD_CAM_EDM_DRO] Brushless motors from models and such
John Delaney
2005-09-03 11:58:13 UTC
Re: Brushless motors from models and such
r@s...
2005-09-03 15:10:42 UTC
RE: [CAD_CAM_EDM_DRO] Brushless motors from models and such
Hugh Prescott
2005-09-03 20:44:26 UTC
Re: [CAD_CAM_EDM_DRO] Brushless motors from models and such
turbulatordude
2005-09-04 01:34:36 UTC
Re: Brushless motors from models and such
Hugh Prescott
2005-09-04 10:24:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such
Les Newell
2005-09-04 10:38:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such
Roy J. Tellason
2005-09-04 11:46:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such
Hugh Prescott
2005-09-04 13:12:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such
Roy J. Tellason
2005-09-04 13:44:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such
Les Newell
2005-09-04 15:13:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such
rod_parsons
2005-09-05 00:24:21 UTC
Re: Brushless motors from models and such
David Bloomfield
2005-09-05 06:37:39 UTC
Re: Brushless motors from models and such