CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Brushless motors from models and such

Posted by r@s...
on 2005-09-03 15:10:42 UTC
Try googling for "hacking servos". It's a fairly popular activity for
the robotics folks to remove the travel stops on RC servos and use them
as motors.

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of turbulatordude
Sent: Saturday, September 03, 2005 12:29 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Brushless motors from models and such

Hi all,

I have been trying to find information on these small hobby motors and
have come up pretty empty.

It seems there is not listing or charts that show what sizes are
available, surprizing that I didn't find manufacturers with such data.

Also, I have not found the electronical link between the controllers and
the R/C receiver. One guy at tech suppport said he thought it was
0-5 volts, but was not sure.

Does anyone know of any hobby lists or other sources of information were
the guys would actually know how the parts work ? it seems the whole
hobby is orienteated towards using the toys and not engineering them.
(just opposite of this list)

Dave








Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators] URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

turbulatordude 2005-09-03 10:29:58 UTC Brushless motors from models and such caedave 2005-09-03 10:54:17 UTC Re: [CAD_CAM_EDM_DRO] Brushless motors from models and such Roy J. Tellason 2005-09-03 11:27:31 UTC Re: [CAD_CAM_EDM_DRO] Brushless motors from models and such John Delaney 2005-09-03 11:58:13 UTC Re: Brushless motors from models and such r@s... 2005-09-03 15:10:42 UTC RE: [CAD_CAM_EDM_DRO] Brushless motors from models and such Hugh Prescott 2005-09-03 20:44:26 UTC Re: [CAD_CAM_EDM_DRO] Brushless motors from models and such turbulatordude 2005-09-04 01:34:36 UTC Re: Brushless motors from models and such Hugh Prescott 2005-09-04 10:24:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such Les Newell 2005-09-04 10:38:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such Roy J. Tellason 2005-09-04 11:46:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such Hugh Prescott 2005-09-04 13:12:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such Roy J. Tellason 2005-09-04 13:44:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such Les Newell 2005-09-04 15:13:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Brushless motors from models and such rod_parsons 2005-09-05 00:24:21 UTC Re: Brushless motors from models and such David Bloomfield 2005-09-05 06:37:39 UTC Re: Brushless motors from models and such