RE: [CAD_CAM_EDM_DRO] Re: Looking for EDM wire

Dave,
I, and probably others, would be very interested in the results of your
experimentation with various wire options.

Andrey

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of turbulatordude
Sent: Tuesday, September 06, 2005 1:01 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Looking for EDM wire

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Andrey Lipavsky"
<alipavsky@c...> wrote:

> Dave,
> Have you considered the piano wire (spring steel) available at most

hobby

> shops? It's spring-hardened and would be a good candidate to test with.
> I've bought pieces in diameters down to 0.015", maybe smaller. It

usually

> comes in 36" lengths and is a buck or two per section.
>
> My two cents worth...
> Andrey

I'm hoping to get into the 0.005 inch range, but that is a decent
place to start.

Since I would be using short lenghts, 1mm exposed or so, I don't think
it should be terribly hard to find something.

Dave

>
> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of turbulatordude
> Sent: Tuesday, September 06, 2005 11:47 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Looking for EDM wire
>
> Hi all,
>
> I'm trying to get my ducts lined up for a plunge EDM I'm building from
> the new Ben Flemming book.
>
> I'd like to get my hands on a few feet of EDM wire of different sizes
> and types to test them out.
>
> It is NOT a wire EDM machine, but I am looking to use EDM wire to poke
> small holes in sheet metal and maybe slots if the wire can be used
> that way.
>
> Anyone know where I can get a few feet of different types of wire ?
>
> Also, it looks as though there are different hardnesses of wire.
> since this would be a plunge unit, hard would be desired.
>
>
> Dave
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,
> timg@k...
> Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to

reach it if

> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are

there, for OT

> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links