CAD CAM EDM DRO - Yahoo Group Archive

Re: PMDX-131 and Mach2

Posted by afogassa
on 2005-11-10 15:34:36 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "rocketscientistnate"
<rocketscientistnate@y...> wrote:
>
> I've been running Deskcnc (software & hardware) on a bridgeport boss5
> retrofit. I rewired it to add extra switches, digitizing probe, 4th
> axis, etc., and change to a second generation, but I can't get it to
> communicate with the pc anymore. Anyway I'm tired of messing with
it,
> and am going to redo some things. I'm looking at the PMDX-131
> combined with mach2 software. I've already got gecko drives and I
> think I'll keep them. Anybody have any thoughts or suggestions
before
> I invest any money in this?
>
> Thanks
> Nathan Clymer
>

You'll need to check the box on 2nd generation controller on machine
setup, otherwise it won't find it.

Discussion Thread

rocketscientistnate 2005-11-10 09:19:42 UTC PMDX-131 and Mach2 Steve Stallings 2005-11-10 10:06:49 UTC Re: PMDX-131 and Mach2 Roy J. Tellason 2005-11-10 10:13:48 UTC Re: [CAD_CAM_EDM_DRO] Re: PMDX-131 and Mach2 Steve Stallings 2005-11-10 10:22:15 UTC Re: PMDX-131 and Mach2 afogassa 2005-11-10 15:34:36 UTC Re: PMDX-131 and Mach2 rocketscientistnate 2005-11-12 09:53:59 UTC PMDX-131 and Mach2 R Rogers 2005-11-12 10:21:07 UTC Re: [CAD_CAM_EDM_DRO] PMDX-131 and Mach2 rocketscientistnate 2005-11-12 13:23:09 UTC Mach2 Fred Smith 2005-11-12 13:47:28 UTC Re: Mach2 Sorin Paul 2005-11-12 14:07:14 UTC Re: [CAD_CAM_EDM_DRO] Mach2