Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder
Posted by
Steve Haushahn
on 2005-11-25 09:27:31 UTC
Dave
Yes , be simple enough to build the structure of the machine. How do you
then take signals from either rotary encoders or linear scales and get them
into the computer to make the drawing?..That would take some kind of 'board'
and software...Thats point where I fall on my face.. I just finished
building up a cnc mill - so I vaguely familiar with some of this but not
enough-- not near enough to make such a gizmo work.
Steven
Yes , be simple enough to build the structure of the machine. How do you
then take signals from either rotary encoders or linear scales and get them
into the computer to make the drawing?..That would take some kind of 'board'
and software...Thats point where I fall on my face.. I just finished
building up a cnc mill - so I vaguely familiar with some of this but not
enough-- not near enough to make such a gizmo work.
Steven
> >
> Actaully such a machine would be pretty easy to build. all roller
> slides, a counterweighted Z would work for the 3D aspects. An easy
> encoder interface for positioning might be just some encoders with a
> rubber wheel against a flat surface. The harder part would be the
> stylus offset to the work to get surface coordinates, One way around
> that is to use a cutting tool with the same radius as the stylus and
> work with no tool offset in the final path.
>
>
>
>
>
>
Discussion Thread
Thomas
2005-11-23 10:10:43 UTC
MSA 665 linear Encoder
linearmeasurement
2005-11-24 08:43:00 UTC
Re: MSA 665 linear Encoder
Thomas
2005-11-24 21:08:12 UTC
MSA 665 linear Encoder
Steve Haushahn
2005-11-25 04:54:54 UTC
Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder
Dave Shiels
2005-11-25 08:41:20 UTC
Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder
Steve Haushahn
2005-11-25 09:27:31 UTC
Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder
Dave Shiels
2005-11-25 13:01:14 UTC
Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder
KM6VV
2005-11-25 17:50:46 UTC
Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder
Thomas
2005-11-26 07:47:46 UTC
Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder
Crs Hawk
2005-11-29 10:28:16 UTC
[CAD_CAM_EDM_DRO] Stepper motors move wrong direction.
Stephen Wille Padnos
2005-11-29 10:48:00 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motors move wrong direction.
Les Newell
2005-11-29 11:00:10 UTC
Isel C142 codes
Crs Hawk
2005-11-29 11:19:31 UTC
Re: [CAD_CAM_EDM_DRO] Isel C142 codes
Les Newell
2005-11-29 13:26:20 UTC
Re: [CAD_CAM_EDM_DRO] Isel C142 codes
Dave Fisher
2005-11-29 14:10:30 UTC
RE: [CAD_CAM_EDM_DRO] Stepper motors move wrong direction.