CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder

Posted by KM6VV
on 2005-11-25 17:50:46 UTC
Hi Thomas,

Try the cutemouse list on Yahoo. A discussion forum for CuteMouse driver. Also
google for mounse drivers.

Alan KM6VV


Thomas wrote:

> Hi Tim
> I figured it out, that part is working nicely !
>
> What I want to do is plot a profile from a small Camshaft into Solidworks either Directly from X & Y Coordinates using a Linear and Rotary Encoder and just left click to create the point in CAD then join the Dots with a spline.
> Taking this a step further I took a cheapo Serial PS2 PC mouse apart and started messing around inside with the X & Y axis and connected the 2 Encoders and the Cursor moves nicely.
>
> Does any one now of any open source Drivers or a suitable program for the Humble ol Mouse or this type of interface ?
>
> I will need to set this up so the Encoders have a Scaled or known movement on the screen the Rotary Encoder is 360 PPR and the Linear Encoder has a Grating of 0.04mm ?
>
> Would this be accurate in Windows ?
>
> any thoughts
>
> Thankyou
> Thomas
>
>
>
>
> ----- Original Message -----
> From: linearmeasurement
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Sent: Thursday, November 24, 2005 11:42 PM
> Subject: [CAD_CAM_EDM_DRO] Re: MSA 665 linear Encoder
>
>
> Thomas,
>
> I am not sure which connector you have on the end of the signal cable
> so I can give you the pin-outs for the RSF standard connector.
>
> L70 Din
>
> Pin 1 - Ground
> Pin 2 - Not used
> Pin 3 - A
> Pin 4 - B
> Pin 5 - 5 volts
> Pin 6 - Reference Index
> Pin 7 - Shield
>
> Regards,
>
> Tim Barnard
> LMSC
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Thomas" <teecee@c...> wrote:
> >
> > Hi all
> > I 'm fresh meat here in this forum and I would like to ask for some
> help with a linear Encoder that I recently picked up, its a MSA655
> linear Encoder without a Plug connection on the cable, if anyone is
> able to give details for the Wiring diagram +5V, Gnd, ChA, ChB.
> >
> > There is a red & Black wire perhaps thats +5V & Gnd if that can be
> confirmed I'm sure I could figure the rest out using the Scope.
> > btw I have had no replies from RSF Elektronik .
> >
> > PN Code: 82277804
> > No: 081-0308430110
> > Grating: 0.04mm
> > MSA: 665
> > Spec: 5F
> > Zero ref Pulse: 7
> >
> > TIA
> > Regards
> > Thomas
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Discussion Thread

Thomas 2005-11-23 10:10:43 UTC MSA 665 linear Encoder linearmeasurement 2005-11-24 08:43:00 UTC Re: MSA 665 linear Encoder Thomas 2005-11-24 21:08:12 UTC MSA 665 linear Encoder Steve Haushahn 2005-11-25 04:54:54 UTC Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder Dave Shiels 2005-11-25 08:41:20 UTC Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder Steve Haushahn 2005-11-25 09:27:31 UTC Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder Dave Shiels 2005-11-25 13:01:14 UTC Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder KM6VV 2005-11-25 17:50:46 UTC Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder Thomas 2005-11-26 07:47:46 UTC Re: [CAD_CAM_EDM_DRO] MSA 665 linear Encoder Crs Hawk 2005-11-29 10:28:16 UTC [CAD_CAM_EDM_DRO] Stepper motors move wrong direction. Stephen Wille Padnos 2005-11-29 10:48:00 UTC Re: [CAD_CAM_EDM_DRO] Stepper motors move wrong direction. Les Newell 2005-11-29 11:00:10 UTC Isel C142 codes Crs Hawk 2005-11-29 11:19:31 UTC Re: [CAD_CAM_EDM_DRO] Isel C142 codes Les Newell 2005-11-29 13:26:20 UTC Re: [CAD_CAM_EDM_DRO] Isel C142 codes Dave Fisher 2005-11-29 14:10:30 UTC RE: [CAD_CAM_EDM_DRO] Stepper motors move wrong direction.