Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
Posted by
johndroc@a...
on 2000-06-29 06:14:49 UTC
In a message dated 06/29/2000 1:18:34 AM Eastern Daylight Time,
mshaver@... writes:
<< http://www.erols.com/mshaver/v2e3.htm >>
(Matt) I know the feeling-this is more or less pro bono work for me, while
I'm waiting for some real work to come through. It looks like the amp is
similar to the one on (Matt's) machine. It is an SD4-3060 - it has two cap's
on it, instead of one. What confused me earlier is that the drawing and
control package were done by Industrial Information Controls, for
Milltronics. I'm reasonably sure it's the amp board, because prior to my
retrofit, the previous machine owner told us that the X axis had slammed all
the way to one end. I had the Y axis working before, so I switched the
boards and now I can't get the Y axis to tune, even starting with the same
settings as the X axis. I'll call SD and see if they have any "quick
diagnostics" to determine a malfunctioning board (maybe runaway axis is an
indication!). Thanks again, to everyone, for the assistance. As soon as I
have time, I'll post some pictures on my web site.
-John
mshaver@... writes:
<< http://www.erols.com/mshaver/v2e3.htm >>
(Matt) I know the feeling-this is more or less pro bono work for me, while
I'm waiting for some real work to come through. It looks like the amp is
similar to the one on (Matt's) machine. It is an SD4-3060 - it has two cap's
on it, instead of one. What confused me earlier is that the drawing and
control package were done by Industrial Information Controls, for
Milltronics. I'm reasonably sure it's the amp board, because prior to my
retrofit, the previous machine owner told us that the X axis had slammed all
the way to one end. I had the Y axis working before, so I switched the
boards and now I can't get the Y axis to tune, even starting with the same
settings as the X axis. I'll call SD and see if they have any "quick
diagnostics" to determine a malfunctioning board (maybe runaway axis is an
indication!). Thanks again, to everyone, for the assistance. As soon as I
have time, I'll post some pictures on my web site.
-John
Discussion Thread
Jon Elson
2000-06-24 22:09:19 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
johndroc@a...
2000-06-25 06:56:38 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
Jon Elson
2000-06-25 22:30:25 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
johndroc@a...
2000-06-26 06:50:08 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
Jon Elson
2000-06-26 12:01:43 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
johndroc@a...
2000-06-26 19:01:13 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
Jon Elson
2000-06-27 10:36:50 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
johndroc@a...
2000-06-28 21:34:50 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
Jon Elson
2000-06-28 21:57:42 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
Matt Shaver
2000-06-28 22:16:47 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
johndroc@a...
2000-06-29 06:14:49 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
johndroc@a...
2000-06-29 20:39:48 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
Jon Elson
2000-06-29 23:04:47 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
johndroc@a...
2000-06-30 05:35:04 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
Jon Elson
2000-06-30 11:28:13 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.
Darrell
2000-06-30 12:25:33 UTC
Re: [CAD_CAM_EDM_DRO] Servo amplifier boards.