CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Z axis drive

Posted by jesse Brennan
on 2006-01-05 11:16:09 UTC
On Jan 5, 2006, at 7:01 AM, Ron Ginger wrote:

Im doing a conversion on a large, square column, mill, like a RF-45, but
from Wholesale Tool

The Quill drive has a rewind spring to keep the quill up, and is driven
down by either a drill press style wheel or a worm gear and small
handwheel.

I am considering driving the handwheel with a belt and stepper, and
hoping the rewind spring can be set strong enough to keep backlash down
to a workable level.

Has anyone tried this? It seems to me the forces are always cutting down
on Z, never when retracting, so the spring ought to do it.

ron ginger
There was an article in one of the HSM or sister magazines about
converting the downfeed on a round cxolumn mill-drill to use a
battery powered screwdriver I believe. This was not recent.. I
should have the magazine but searching might take a while. Online
index doesn't seem to help but that may just be me. Since this
seemed to have worked you shouldn't have a problem with a stepper
motor. I will hunt for it but don't hold your breath too long.

jesse

jesse


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@..., timg@...
Moderator: pentam@... indigo_red@...
davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/
rec.crafts.metalworking or go thru Google.com to reach it if you have
trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

Brian Fairey 1999-08-01 04:17:17 UTC Z axis drive Dan Falck 1999-08-01 05:32:47 UTC Re: Z axis drive Ron Ginger 2006-01-05 05:02:28 UTC Z axis drive Les Newell 2006-01-05 05:20:59 UTC Re: [CAD_CAM_EDM_DRO] Z axis drive Ken Strauss 2006-01-05 05:51:47 UTC RE: [CAD_CAM_EDM_DRO] Z axis drive kmslinda 2006-01-05 08:00:39 UTC Re: Z axis drive Anders Wallin 2006-01-05 08:22:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis drive Jon Elson 2006-01-05 09:45:48 UTC Re: [CAD_CAM_EDM_DRO] Z axis drive Art Eckstein 2006-01-05 10:14:49 UTC Re: [CAD_CAM_EDM_DRO] Z axis drive jesse Brennan 2006-01-05 11:16:09 UTC Re: [CAD_CAM_EDM_DRO] Z axis drive n1ych 2006-01-05 13:44:17 UTC Re: Z axis drive Anders Wallin 2006-01-05 13:55:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis drive kmslinda 2006-01-05 14:24:59 UTC Re: Z axis drive kmslinda 2006-01-05 14:30:26 UTC Re: Z axis drive spc_aux 2006-01-05 15:53:23 UTC Re: Z axis drive JCullins 2006-01-05 17:51:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis drive Ron Ginger 2006-01-05 18:35:45 UTC Re: Z axis drive skykotech 2006-01-05 20:44:06 UTC Re: Z axis drive gary 2006-01-05 21:37:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis drive spc_aux 2006-01-06 05:50:46 UTC Re: Z axis drive spc_aux 2006-01-06 05:55:58 UTC Re: Z axis drive skykotech 2006-01-06 08:02:41 UTC Re: Z axis drive gary 2006-01-06 08:58:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis drive R Rogers 2006-01-06 10:03:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis drive spc_aux 2006-01-06 10:47:42 UTC Re: Z axis drive George Taylor, IV 2006-01-06 11:17:05 UTC RE: [CAD_CAM_EDM_DRO] Re: Z axis drive R Rogers 2006-01-06 11:57:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis drive Dan Mauch 2006-01-06 12:05:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis drive spc_aux 2006-01-06 15:36:34 UTC Re: Z axis drive spc_aux 2006-01-06 15:47:47 UTC Re: Z axis drive wthomas@g... 2006-01-07 21:35:54 UTC W.E.T.[CAD_CAM_EDM_DRO] Re: Z axis drive gary 2006-01-08 13:54:43 UTC Re: W.E.T.[CAD_CAM_EDM_DRO] Re: Z axis drive longassscreenname 2006-01-14 13:01:17 UTC Re: Z axis drive