Re: [CAD_CAM_EDM_DRO] Re: Epoxy Granite supplier

Ok but you might be surprised as to the flexibility of Machinemate. Who's
Laser displacement sensors are you using. I have used Optodyne.

Harko

On 3/6/06, Jack Hudler <yahoo@...> wrote:
>
> Harko,
> I'm a professional software engineer and I specialize is motion
> bases.
> The software to generate the figure might be something off the
> shelf.
> However, I doubt it would be flexible enough for my purpose. Lot of the
> stuff I
> can do in National Instruments LabView which I use to drive 7334 and 7354
> Motion
> Controller plus all the other Data Acquisition cards.
> What I'm doing right now is bread boarding up a DSP (Digital Signal
> Processor) to tie the 2 laser displacement sensors in real-time and
> control a PI
> Nano-Positioner that has a resolution of .1nm open loop and 1nm closed.
> Essentially what I'm doing is vibration control of the cutter so it
> doesn't pit
> the surface (so it doesn't look like phonograph record) and monitor the
> cut
> depth. This may not be necessary in the end, but it fun to play with at
> the
> moment.
>
> Jack Hudler
>
> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com [mailto:
> CAD_CAM_EDM_DRO@yahoogroups.com]
> On Behalf Of Harko Schwartz
> Sent: Sunday, March 05, 2006 9:33 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Re: Epoxy Granite supplier
>
> The best Epoxy Cement is made by Philadelphia Resin they have been making
> product for the machine tool industry for a long time. When making such a
> expensive part i wouldn't mess around with a homebrew cnc you are going to
> be spending enough time for macro generation and you can use the Power
> Automation CNC controller at about 1900 euro. It has analog input for
> sensors and can totally handle anytype of tool offset.
>
> Harko
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>


[Non-text portions of this message have been removed]