RE: [CAD_CAM_EDM_DRO] Re: flexible couplings for PCB router - coupling

>
> I put a file in the files section. not too high deff.
>
> It shows how one can slot a connector to obtain some flexability.
>
> the key is that the only part that really flexes is at the inside
> diam, between the place the sections are joined.
>
> Use a samll dia cutter and you get long sweeping cuts. get a smaller
> dia and you get tighter bend.
>
> If you wanted to attempt a screw slot, the problem with those are that
> they are springy.
>
> Dave