Re: [CAD_CAM_EDM_DRO] transformer question

I am not very knowledgeable about electrical stuff, but I am running gecko
320 drives in a Bridgeport series 1 CNC. There is a transformer (T2) before
the power supply that can be set up for different voltage. I set it up for
480 volts when my line voltage is actually 240 which cut the voltage to the
power supply in 1/2. The original set up was 128 volts to the servos now I
have 65 volts. It is a new setup not many hours of testing but is working
good now.
Brad Dirks,

----- Original Message -----
From: "turbulatordude" <dave_mucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, May 06, 2006 5:57 PM
Subject: [CAD_CAM_EDM_DRO] transformer question


> Hi,
>
> I have a transformer with a lable of 220/460 primariy and 110/220
> secondary.
>
> 1kva.
>
> Would I be able to connect it 110 to get 55 volt ? and if so, any idea
> what current I could pull out of it ?
>
> Actually, I know I could get the 110V in and 55 out, but what current
> is the real question.
>
> Dave
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>