Re: [CAD_CAM_EDM_DRO] Inverters/phase converters

What I was pointing out is you only need a converter large enough to start
your largest load. As you add motors to the load, they add capacity to start
other loads. If you have a 5hp converter and then you start a 3hp motor, you
should then be able to start a 7 1/2 hp motor as long as your mains can
supply the current.
Darrell

----- Original Message -----
From: Charles VanLeeuwen <cavlon@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: Wednesday, July 05, 2000 8:05 PM
Subject: Re: [CAD_CAM_EDM_DRO] Inverters/phase converters


> My experience with rotary converters is that they seem happiest when they
> are loaded at rated capacity.
>
> cvl
>
>
>
> ------------------------------------------------------------------------
> Who invented Gatorade -- and what part did it play in
> winning the1967 Orange Bowl? Find out the true facts at
> http://click.egroups.com/1/6212/4/_/423600/_/962852855/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>