Re: [CAD_CAM_EDM_DRO] New machine zeroing trick with laser

Fred,

Someone sells a spindle mounted laser edge finder and was discussed here a while back. They might be ok for woodwork, but metal working, it was like +/- .010" Simply not accurate enough..

Ron

Fred Smith <imserv@...> wrote:
I don't know if it is really new or not, but it is new to me.

While talking with one of our many happy customers who have
converted their CNC machines to DeskCNC control systems, the
conversation drifted to limit switches, fixture offsets and zero
setting on table based machines. Their method of finding a fixture
zero was interesting to me, and I thought I would share it with the
group.

They have installed a laser pointer onto the Z axis, aimed at the
table below the spindle. The laser pointer is offset somewhat from
the spindle centerline, so it stays mounted during machine
operation. They have placed a pin-hole aperture over the laser
pointer lens to reduce the size of the spot projected below.

The work holding fixture has a target hole made by driving a small
finishing nail into the wooden base, then removing the nail. To
zero the fixture, the laser pointer is turned on and jogged over the
hole. As the spot is positioned over the center of the hole, it
disappears. Moving the laser pointer, just a couple of thousandths
off the center of the hole and the spot reappears in that direction
of movement. This is apparently sensitive enough to provide the
fixture location with in a few thousandths of an inch(plenty good
for woodworking). It repeats reliably and permits fixture setting
without cutting tool contact or removal.

Any others incorporated/designed/used similar devices in your CNC
machines?

------------------------------------------

This article was paid for by the ongoing support of hobby and
commercial customers that utilize our products.

IMService, THE source for low cost cad-cam and desktop CNC

Fred Smith
http://www.cadcamcadcam.com/hobby





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links










[Non-text portions of this message have been removed]