CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Manual Series One 2J, RETROFIT HELP

Posted by Les Newell
on 2006-06-19 00:56:53 UTC
If you intend to retrofit it then you can also remove the two big cabinets. On my machine I threw away the computer cabinet and moved the power cabinet to the right hand side. All of the new electronics are fitted in the power cabinet. This makes the machine's footprint much smaller.

Les

> Uh, why? The BOSS series I is no taller than a Series-I manual machine
> with the varispeed head.
> (Or, maybe it is a couple inches taller.) And, it really isn't a whole
> lot wider than a manual
> machine, either. I guess the saddle is wider, and that may prevent you
> from doing the
> trick with angling it through a 32" door and then swinging it through
> the doorway after
> cranking the table into the room.
>

Discussion Thread

John Stevenson 2006-06-17 22:19:45 UTC Re: Bridgeport Manual Series One 2J, RETROFIT HELP Chuck Pool 2006-06-18 19:06:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Manual Series One 2J, RETROFIT HELP Jon Elson 2006-06-18 22:24:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Manual Series One 2J, RETROFIT HELP Les Newell 2006-06-19 00:56:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Manual Series One 2J, RETROFIT HELP R Rogers 2006-06-19 05:49:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Manual Series One 2J, RETROFIT HELP